Abstract:Although the auxetic structure exhibits excellent mechanical properties, the low stiffness, and strength still limit its development. Considering the high stiffness and strength of the sandwich structure, a novel sandwich beam with an enhanced auxetic core (SCH SWB) was proposed in this paper. The accuracy of the finite element (FE) modeling was first verified by quasi-static bending experiments. Then, based on FE simulation, the deformation modes and energy absorption were explored. The results showed that local indentation and global bending deformation coexisted under the mid-span loading, and the core can absorb the most energy. Furthermore, using the analogy method, and based on the yield criterion and indentation response of the foam sandwich beam, a theoretical model was established to predict the force response, which considered the influence of local indentation on the overall bending, and the double-plateau characteristic of the auxetic core. The theoretical results were basically consistent with the simulation. Subsequently, the influence of the key parameters of the core and faces on the mechanical responses was discussed in depth, and it was found that changing the key geometric parameters and the material combination of the faces and the core can significantly vary the energy absorption capacity. Finally, several sandwich beams with different auxetic cores were compared, and the results proved that SCH SWB exhibited superior bending resistance and higher energy absorption. This paper presents a new idea and theoretical basis for studying the mechanical response of auxetic sandwich beams. The results show that the auxetic sandwich beam has great potential in aerospace, automobile crash, impact protection of key engineering structures, etc.

Localized Indentation of Sandwich Beam with Metallic Foam Core

Localized Indentation of Sandwich Panels with Metallic Foam Core: Analytical Models for Two Types of Indenters

Indentation Behavior Of Sandwich Structures With Metallic Foam Core

Indentation of sandwich beams with metal foam core

Indentation of Metal Foam Core Sandwich Beams: Experimental and Theoretical Investigations

A New Indentation Model for Sandwich Circular Panels with Gradient Metallic Foam Cores

Plastic analysis of metal foam core sandwich beam transversely loaded by a flat punch: Combined local denting and overall deformation

Analytical solution for pin-supported metal foam core sandwich beam with local denting

Low-Velocity Impact Response of Fully Clamped Metal Foam Core Sandwich Beam Incorporating Local Denting Effect

An Analytical Modeling for Indentation Response of Sandwich Panels with Gradient Foam Cores

Quasi-Static Indentation Behavior of Honeycomb Sandwich Materials and Its Application in Impact Simulations

Low-velocity Impact Response of Sandwich Beams with a Metal Foam Core: Experimental and Theoretical Investigations

Large Deflections of Multilayer Sandwich Beams with Metal Foam Cores under Transverse Loading

Failure Analysis of Sandwich Beams under Three-Point Bending Based on Theoretical and Numerical Models

Lateral Plastic Behaviour of Rectangular Sandwich Tubes Considering Local Denting

Plastic behavior of sandwich beams with fiber metal laminate face-sheets and metal foam core: Combined local denting and overall deformation

The Load-Carrying Capacity of Sandwich Beams in Different Collapse Mechanisms

INDENTATION ANALYSIS OF METALLIC FOAM-FILLED CYLINDRICAL PIPE UNDER TRANSVERSELY LINEAR LOADING

An Analytical Solution for the Large Deflections of a Slender Sandwich Beam with a Metallic Foam Core under Transverse Loading by a Flat Punch

Quasi-static Punch Indentation of a Honeycomb Sandwich Plate: Experiments and Modelling

Quasi-static Bending Response and Energy Absorption of a Novel Sandwich Beam with a Reinforced Auxetic Core under the Fixed Boundary at Both Ends