Abstract:Indentation analysis in multilayer composite sandwich panels. This study examines the effects of multilayering in sandwich panel composite structures with different corrugated core configurations under quasi‐static indentation loading. The panels were fabricated using woven glass fibers and epoxy resin via the Vacuum Infusion Process. Experiments were conducted using two hemispherical cylindrical indenters with a diameter of 20 mm (ID = 20 mm) and 10 mm (ID = 10 mm) and the behavior of the composite structure in terms of contact force and fracture mechanisms for different core corrugations (square and butterfly) were investigated in two ways with foam and without foam. The experimental results demonstrate that, among corrugated core geometries without foam, butterfly cores outperform square cores in terms of structural strength, maximum force, moment force, energy absorption, specific energy absorption, and displacement until full indentation. Moreover, the butterfly core shows a higher peak load and different failure mechanisms compared to the square core. Under loading with a 10 mm indenter, the butterfly core without foam only experienced perforation in the loading area, without fracture completely. Also, adding foam did not change failure mechanisms and mechanical behavior in the butterfly geometry. However, in the square geometry, foam filled gaps between the core, preventing fracture completely and leading to only perforation in the loading area, unlike the specimen without foam. The visual analysis during the quasi‐static indentation process revealed several significant damage mechanisms, including matrix cracking, fiber breakage, delamination, buckling and crushing of cell walls, damage to top sheets, core separation, and complete indentation of the samples. Highlights Delamination and indentation failure mechanisms were seen on the butterfly core. Skin indentation and rib fracture failure mechanisms were seen on the square core. Butterfly corrugated cores revealed the best performance without/with foam. The core shape was more effective on the strength than the foam addition.

Indentation of Composite Sandwich Panels with Aluminum Foam Core: an Experimental Parametric Study

Investigation of the Indentation Resistance of Aluminum Foam Sandwich Panels with Metallurgical Bonding Interfaces under Low-Velocity Impact

Experimental and numerical investigation on indentation and energy absorption of a honeycomb sandwich panel under low-velocity impact

The Impulsive Response of Aluminium Foam Core Sandwich Structures

Experimental analysis of quasi‐static indentation in composite sandwich multilayers with corrugated core

Compressive Strength and Energy Absorption of Sandwich Panels with Aluminum Foam-Filled Corrugated Cores

Sandwich panel behavior under low-velocity impact with polyurethane core

On low-velocity impact response of foam-core sandwich panels

Energy absorbing characteristics of the composite contoured-core sandwich panels

Quasi-static indentation and sound-absorbing properties of 3D printed sandwich core panels

Quasi-static perforation of the ceramic foam core sandwich panels impregnated with Newtonian and non-Newtonian fluids

Three-point bending behaviors of the foam-filled CFRP X-core sandwich panel: Experimental investigation and analytical modelling

Effects of Aluminum Foam Filling on Compressive Strength and Energy Absorption of Metallic Y-Shape Cored Sandwich Panel

Experimental and Numerical Studies on Core Stiffened Sandwich Composite Panel

In-plane compressive response of composite sandwich panels with local-tight honeycomb cores

Computational Analysis of Sandwich Panels with Graded Foam Cores Subjected to Combined Blast and Fragment Impact Loading

Quasi-static Indentation Responses of FMLs/2.5D Woven Carbon-Fiber Honeycomb Sandwich Structures under Different Structural Parameters

Experimental investigation into the synergetic damage of foam-filled and unfilled corrugated core hybrid sandwich panels under combined blast and fragment loading

Low-Velocity Impact Behavior of Foam Core Sandwich Panels with Inter-Ply and Intra-Ply Carbon/Kevlar/Epoxy Hybrid Face Sheets

Dynamic response and energy absorption of aluminum foam sandwich under low-velocity impact

Analytical model of low-velocity impact penetration of sandwich panels with metal foam core and nanocomposite face sheets