Abstract:In this brief, a millimeter-wave (mm-Wave) wideband frequency quadrupler is demonstrated in a 55-nm CMOS technology. It cascades two injection-locked frequency doublers (ILFD). Each of them consists of an oscillator gain stage realized by an injection-locked oscillator (ILO) and a frequency doubler implemented by a push-push pair. A tail feedback loop is proposed and applied in the second ILFD. It effectively boosts the injection current for the second ILFD. Therefore, both the operating bandwidth and output power (Pout) of the circuit are prominently improved. In addition, transformer-based high-order resonators are used to reduce the phase variation of their impedance around 0° and hence extend the locking range of ILOs. According to the measurement results, a frequency range of 30.8 ~40 GHz is achieved. The maximum Pout is up to -7.1 dBm without additional buffers. The circuit also attains a wide 3-dB frequency bandwidth of Pout, which is from 32 to 38.4 GHz. The harmonic rejection ratios of the frequency quadrupler are 16.5 ~25.9 dBc at the second-order harmonic and 31 ~45 dBc at the fundamental and third-order harmonics over the entire operating bandwidth. The core area occupies only 0.24 mm 2 .

Analysis and Design of Ultra-Wideband Mm-Wave Injection-Locked Frequency Dividers Using Transformer-Based High-Order Resonators.

A Low Power V-Band CMOS Frequency Divider with Wide Locking Range and Accurate Quadrature Output Phases.

A Wide Locking Range and Low Power V-band Frequency Divider in 90nm CMOS

A Dual-Mode Mm-Wave Injection-Locked Frequency Divider with Greater Than 18% Locking Range in 65nm CMOS

A 3 Mw 54.6 GHz Divide-by-3 Injection Locked Frequency Divider with Resistive Harmonic Enhancement

Gigahertz range injection locked frequency dividers with band-width enhancement and supply rejection

A 27.9–53.5-Ghz Transformer-Based Injection-Locked Frequency Divider with 62.9% Locking Range

Optimization of Injection Locked Frequency Divider with Tunable Active Inductor

A Wideband CMOS Frequency Quadrupler with Transformer-Based Tail Feedback Loop.

19.1 GHz 18 Mw Divide-by-3 Heterodyne Injection Locking Frequency Divider in 0.18 Μm CMOS Technology

Design and optimization of the ring oscillator based injection locked frequency dividers.

A Reliability-Oriented Startup Analysis of Injection-Locked Frequency Divider Based on Broken Symmetry Theory

A 40.3–50.5 GHz Locking Range Transformer‐based Injection‐locked Frequency Divider Utilizing a High Third Harmonic Rejection Buffer

A Wide-Band Divide-by-2 Injection-Locked Frequency Divider Based on Distributed Dual-Resonance Tank

6.2 GHz 0.5 Mw Two‐dimensional Oscillator Array‐based Injection‐locked Frequency Divider in 0.18 Μm CMOS

A 60ghz Wideband Injection-Locked Frequency Divider with Adaptive-Phase-enhancing Technique

A K-Band Low-Power Phase Shifter Based on Injection Locked Oscillator in 0.13 Μm CMOS Technology

A 60.8–67GHz and 6.3mW injection-locked frequency divider with switching-inductor loaded transformer in 65nm CMOS

An Injection-Current-Boosting Locking-Range Enhancement Technique for Ultra-Wideband Mm-Wave Injection-Locked Frequency Triplers

A 1.5 Mw 26.2&#x2013;32.2 GHz Divide-by-4 Injection-Locked Frequency Divider in 130 Nm CMOS Process

A 30-Ghz to 39-Ghz Mm-Wave Low-Power Injection-Locked Frequency Divider in 65nm CMOS.