Abstract:In this paper, the large signal operation of the ring oscillator based injection locked frequency divider is analyzed considering the trade-offs among the operating frequency, locking range and power consumption. A large signal model is used to reveal several key findings such as voltage-limited locking ranges and asymmetry between the upper and lower locking bands. They are applied to the optimize the dividers maintaining a good balance among design considerations. Several prototypes, including the divide-by-2 with 3 and 5 stages of inverters, divide-by-3 and divide-by-5, are implemented in a standard 0.18 µm CMOS technology to verify the operation under a large injected signal. As an extension, dual-modulus prescalers are further designed by the integration of switches for different ways of signal mixing. Measurements results show the proposed divide-by-2/3 unit and a divide-by-8/9 with this unit are able to work up to 8 GHz and 4.0 GHz with maximum power consumption of 0.7 mW and 1.5 mW respectively.

Design and optimization of the ring oscillator based injection locked frequency dividers.

6.2 GHz 0.5 Mw Two‐dimensional Oscillator Array‐based Injection‐locked Frequency Divider in 0.18 Μm CMOS

A Low Power V-Band CMOS Frequency Divider with Wide Locking Range and Accurate Quadrature Output Phases.

A Wide Locking Range and Low Power V-band Frequency Divider in 90nm CMOS

19.1 GHz 18 Mw Divide-by-3 Heterodyne Injection Locking Frequency Divider in 0.18 Μm CMOS Technology

A Dual-Mode Mm-Wave Injection-Locked Frequency Divider with Greater Than 18% Locking Range in 65nm CMOS

200Ghz CMOS Prescalers with Extended Dividing Range Via Time-Interleaved Dual Injection Locking

0.8 Mw 1.1–5.6 GHz Dual-Modulus Prescaler Based on Multi-Phase Quasi-Differential Locking Divider

A 3 Mw 54.6 GHz Divide-by-3 Injection Locked Frequency Divider with Resistive Harmonic Enhancement

Optimization of Injection Locked Frequency Divider with Tunable Active Inductor

A Reliability-Oriented Startup Analysis of Injection-Locked Frequency Divider Based on Broken Symmetry Theory

0.6mW 6.3 GHz 40nm CMOS divide‐by‐2/3 prescaler using heterodyne phase‐locking technique

Sub-mW Multi-Ghz CMOS Dual-Modulus Prescalers Based on Programmable Injection-Locked Frequency Dividers

0.6Mw 6.3 Ghz 40nm Cmos Divide-By-2/3 Prescaler Using Heterodyne Phase-Locking Technique

Bandwidth-Related Optimization in High-Speed Frequency Dividers Using Sige Technology

1 V 10 GHz CMOS frequency divider with low power consumption

A Cmos Frequency Divider for 2.4/5ghz Wlan Applications with A Simplified Structure

Cmos Prescaler(S) With Maximum 208-Ghz Dividing Speed And 37-Ghz Time-Interleaved Dual-Injection Locking Range

Design Of A Low Power Wide-Band High Resolution Programmable Frequency Divider

1–2 GHz 2 Mw Injection-Locked Ring Oscillator Based Phase Shifter in 0.18 Μm CMOS Technology

A K-Band Low-Power Phase Shifter Based on Injection Locked Oscillator in 0.13 Μm CMOS Technology