Abstract:Based on the principle of superposition and a newly developed stripe method, an analytical equivalent model is proposed to calculate the stress fields in two imperfect planar isotropic lattices: the regular triangular lattice and the Kagome lattice, both containing single bar defects. Finite element simulations are used to validate the model predictions. According to the degree of the imperfection, four types of defects: vacancy defect, weak defect, strong defect, and rigid inclusion are classified and the induced local stress fields are analyzed. The stress concentration factor (SCF) caused by the imperfection is analytically obtained, and the influence of the imperfection degree, loading condition, and relative density on the SCF is quantified. Based on the equivalent model, the interaction of dual defects with the thickness of elastic boundary layer in the two lattices is also estimated. In the presence of a vacancy defect, the distinct deformation mechanism results in only a small knock-down in the strength of a triangular lattice but a substantial strength knock-down of a Kagome lattice. Both lattices exhibit no obvious sensitivity to the presence of a rigid inclusion. It is indicated that compared with the corresponding Kagome lattice, the triangular lattice containing a single missing bar possesses a considerable better strength performance. In addition, the analytical results of imperfection interaction demonstrate that the influence of imperfections on stress field calculations and strength analysis is important for the triangular lattice.

Plastic Zone of Semi-Infinite Crack in Planar Kagome and Triangular Lattices

ANALYSIS OF YIELD SURFACE AND CRACK TIP PLASTIC ZONE OF KAGOME LATTICE STRUCTURE

Plastic yield and collapse mechanism of planar lattice structures

Fracture Characteristic Analysis of Cellular Lattice Structures under Tensile Load

A Plastic Zone Equation Based on Mean Yield Criterion

CRACK PROPAGATION IN POLYCRYSTALLINE ELASTIC-VISCOPLASTIC MATERIALS USING COHESIVE ZONE MODELS

Preliminary Study on Ductile Fracture of Imperfect Lattice Materials

Effects of High Order Deformations on the Strength of Planar Lattice Materials

Cylindrical Void in a Rigid-Ideally Plastic Single Crystal. Part I: Anisotropic Slip Line Theory Solution for Face-Centered Cubic Crystals

Stress Concentration in Two-Dimensional Lattices with Imperfections

Mechanical Properties of two novel planar lattice structures

The damage tolerance of elastic–brittle, two-dimensional isotropic lattices

Constraints on the Crack Tip Plastic Fields under Large Scale Yield

Plastic zone size and crack tip opening displacement of a Dugdale crack interacting with a coated circular inclusion

Fracture of four semi-regular lattices regulated by T -stress in modified boundary layer models

Plastic Zone at Mixed Mode Non- Crystal Axial Crack Tip in Nickel-Based Single Crystal Plate

Fracture in Mechanism-Based Strain Gradient Plasticity

Study on plastic yield surfaces of pyramidal lattice materials with circular and rectangular cross-sections

Collapse of periodic planar lattices under uniaxial compression, part I: Quasi-static strength predicted by limit analysis

On the Plastic Zone Size and CTOD Study for a Zener–Stroh Crack Interacting with a Circular Inclusion

On Quasi-Static and Dynamic Compressive Behaviors of Interlocked Composite Kagome Lattice Structures