Abstract:This study aims at introducing the back stress of anisotropic strain-hardening into the crystal plasticity theory and demonstrating the rationality of this crystal plasticity model to describe the evolution of the subsequent yield surface of polycrystalline aluminum at the mesoscopic scale under complex pre-cyclic loading paths. By using two different scale finite element models, namely a global finite element model (GFEM) as the same size of the thin-walled tube specimen used in the experiments and a 3D cubic polycrystalline aggregate representative volume element (RVE) model, the evolution of the subsequent yield surface for different unloading cases after 30 pre-cycles is further performed by experiments and numerical simulations within a crystal plasticity finite element (CPFE) frame. Results show that the size and shape of the subsequent yield surfaces are extremely sensitive to the chosen offset strain and the pre-cyclic loading direction, which present pronounced anisotropic hardening through a translation and a distortion of the yield surface characterized by the obvious "sharp corner" in the pre-deformation direction and "flat" in the reverse direction by the definition of small offset strain, while the subsequent yield surface exhibits isotropic hardening reflected by the von Mises circle to be distorted into an ellipse by the definition of large offset strain. In addition, the heterogeneous properties of equivalent plastic strain increment are further discussed under different offset strain conditions. Modeling results from this study show that the heterogeneity of plastic deformation decreases as a law of fraction exponential function with the increasing offset strain. The above analysis indicates that anisotropic hardening of the yield surface is correlated with heterogeneous deformation caused by crystal microstructure and crystal slip. The crystal plasticity model based on the above microscopic mechanism can accurately capture the directional hardening features of the yield surface.

ANALYSIS OF YIELD SURFACE AND CRACK TIP PLASTIC ZONE OF KAGOME LATTICE STRUCTURE

Plastic Zone of Semi-Infinite Crack in Planar Kagome and Triangular Lattices

Plastic yield and collapse mechanism of planar lattice structures

Effects of High Order Deformations on the Strength of Planar Lattice Materials

ANALYSIS OF INTERFACE CRACKS AT A FIBER END

Study on plastic yield surfaces of pyramidal lattice materials with circular and rectangular cross-sections

A Plastic Zone Equation Based on Mean Yield Criterion

Mechanical Properties of two novel planar lattice structures

Deformation and failure mechanisms of lattice cylindrical shells under axial loading

Anisotropic yielding model of lattice material and influencing factors

Stress Concentration in Two-Dimensional Lattices with Imperfections

Mechanical Properties And Design Of Lattice Composites And Structures

Preliminary Study on Ductile Fracture of Imperfect Lattice Materials

Yield surfaces and micro-failure mechanism of block lattice truss materials

FEM Solutions for Plane Stress Mode-I and Mode-Ii Cracks in Strain Gradient Plasticity

Theoretical plastic stress-strain relationship of a polycrystal and the comparisons with the von Mises and the Tresca plasticity theories

Nonlinear mechanical properties of lattice truss materials

On the Structure of Anisotropic Damage Yield Criteria

Investigation of Yield Surfaces Evolution for Polycrystalline Aluminum after Pre-Cyclic Loading by Experiment and Crystal Plasticity Simulation

Analytical Characterizations of Crack Tip Plastic Zone Size for Central-Cracked Unstiffened and Stiffened Plates under Biaxial Loading

Compression and energy absorption of wood-based reinforced 3D Kagome lattice structures