Abstract:This study focuses on investigating the effect of ignition temperature for the combustion synthesis (CS) on the selective catalytic reduction of NOx with NH3 over Ti0.9Ce0.05V0.05O2−δ nanocomposites serial catalysts prepared by the solution combustion method. Ti0.9Ce0.05V0.05O2−δ-350°C showed the best SCR activity and N2 selectivity in a broad temperature window of 150–400°C, in which more than 83% NOx was reduced with the superior N2 selectivity above 95%. The influence of the ignition temperature for CS on the physical and morphological properties, the crystalline phase, the microstructure, the redox behavior, the oxidation state, the reactants adsorption capability, and the evolution of the surface nitrate and acid sites after the adsorption of NOx and NH3 was extensively investigated in detail using comprehensive characterization techniques including N2 physisorption, XRD, SEM, TEM, FTIR, EPR, and XPS. The increase of the ignition temperature, the decrease of the specific surface area, the total desorption pore volume, the surface fractal dimension, and the concentration of the chemisorbed oxygen, and the increase of the average pore diameter and the particle size, which may be the main reasons for the decline of the NOx removal efficiency and the N2 selectivity. In addition, the NOx/NH3-TPD results suggest that the Ti0.9Ce0.05V0.05O2−δ catalysts prepared at lower ignition temperatures could provide more chemisorption NOx and NH3 species, and simultaneously enhance the activation of both species that result in the improvement of the SCR activity. Furthermore, the in situ DRIFTS results indicate that the active monodentate nitrate and bridging nitrate species come from the NOx adsorption and that the ionic NH4+ bound to the BrØnsted acid sites are active species and essential for the SCR process. The increase of the ignition temperature decreases the key surface nitrate species and acid sites, and thus the relevant NH3-SCR activity and selectivity.

Influence of Calcination Temperature on the Plate-Type V 2 O 5 –moo 3 /tio 2 Catalyst for Selective Catalytic Reduction of NO

Selective Catalytic Reduction of No with Nh3 over Mnox-Ceo2-Wo3-Zro2: Effect of Calcination Temperature

Tailoring the Proceeding of the NH3-SCO and NH3-SCR Reactions over FeOx Catalysts by Modifying with NbOx

Influence of Calcination Temperature over Vanadium–Molybdenum Catalysts for the Selective Catalytic Reduction of NO x with NH 3

Influence of Calcination Temperature over Vanadium–Molybdenum Catalysts for the Selective Catalytic Reduction of NOx with NH3

Effect of Calcination Temperature on the Activation Performance and Reaction Mechanism of Ce–Mn–Ru/TiO 2 Catalysts for Selective Catalytic Reduction of NO with NH 3

Effect of Calcination Temperature on the Structure and Performance of Mn/Al2O3-TiO2 Catalyst in the Catalytic Oxidation of NO

A Highly Effective Catalyst of Sm-Mn Mixed Oxide for the Selective Catalytic Reduction of Nox with Ammonia: Effect of the Calcination Temperature

Influence of Calcination Temperature on the Selective Catalytic Reduction Performance and Physicochemical Properties of Ceria Doped Titanate Nanotubes

Highly Efficient Mesoporous V2O5/WO3–TiO2 Catalyst for Selective Catalytic Reduction of NOx: Effect of the Valence of V on the Catalytic Performance

Effects of CrOx species doping on V2O5-WO3/TiO2 catalysts on selective catalytic reduction of NOx by NH3 at low temperature

Thermal Stability of Si-doped V 2 O 5 /WO 3 –tio 2 for Selective Catalytic Reduction of NO X by NH 3

Low Temperature Selective Catalytic Reduction of NO and NO2 with NH3 over Activated Carbon-Supported Vanadium Oxide Catalyst

Low Temperature Selective Catalytic Reduction of NO over Manganese Supported on TiO2 Nanotubes

Effect of Ignition Temperature for Combustion Synthesis on the Selective Catalytic Reduction of NO with NH3 over Ti0.9Ce0.05V0.05O2− Nanocomposites Catalysts Prepared by Solution Combustion Route

Effects of calcination temperature on physicochemical property and activity of CuSO4/TiO2 ammonia-selective catalytic reduction catalysts

Improvement of the Activity of Γ-Fe2o3 for the Selective Catalytic Reduction of NO with NH3 at High Temperatures: NO Reduction Versus NH3 Oxidization

Performance of V_2O_5-WO_3-MoO_3/TiO_2 Catalyst for Selective Catalytic Reduction of NO_x by NH_3

Nh3 Selective Catalytic Reduction of No: A Large Surface Tio2 Support and Its Promotion of V2o5 Dispersion on the Prepared Catalyst

Low-Temperature Performance of Pt/Tio2 for Selective Catalytic Reduction of Low Concentration No by C3h6

Performance of Low-temperature SCR of NO with NH3 over MnOx/Ti-based catalysts