Abstract:Ductile iron contains free graphite nodules inside the metallic matrix, which generally consists of ferrite and pearlite in the as-cast condition. The casting thicknesses greatly influence on the size, shape, and quantity of the microconstituents of the metallic matrix and the graphite nodules and, therefore, on the mechanical properties. This investigation studied the cooling rate (imposed by the casting thicknesses) on the metallic matrix and the nodular characteristics of a ductile iron low alloyed with 0.8 %Ni and 0.15 %V. The ductile iron was manufactured by the sandwich technique with ladle inoculation. Six plates of different thicknesses, from 4.3 mm to 25.4 mm, were fabricated in a green sand mold. The microstructural characterization was performed by optical microscopy (OM), scanning electron microscopy (SEM), and the image J software by applying different quantification methods. The area method to obtain the average nodule size and nodularity provided more reliable results than the perimeter and total particle count methods. The hardness test on the Rockwell C scale carried out the mechanical characterization. The low content of vanadium added to the ductile cast iron had a negligible effect on the solidification pattern, mainly due to the graphitizing impact of the nickel and silicon addition. Thus, the microstructural features results are primarily due to the cooling rate imposed by the casting thickness. The thinnest casting section significantly improves the nodule count (414 Nod/mm2), sphericity (0.96), and nodularity (96.21 %). In contrast, the thickest casting plate obtained the highest volume fraction of graphite (10.85 %) and the lowest volume fraction of undesirable particles (0.36 %). The high cooling rate in the thinnest casting plate obtained the highest hardness of 31.56 HRC because of the higher contents of the volume fraction of pearlite (33.7 %) and carbides (4.5 %).

3D Quantitative Analysis of Graphite Morphology in Ductile Cast Iron by X-ray Microtomography

Challenges and possibilities of the manual metallographic serial sectioning process using the example of a quantitative microstructural analysis of graphite in cast iron

Effect of regular thicknesses on the microstructural and quantitative analysis for a hypo-eutectic ductile iron alloyed with Ni and V

On the Morphology Variation of Graphite in Ductile Cast Iron through Severe Plastic Deformation

Tomographical Study Of The Effect Of Graphite On Properties Of Cast Iron

Graphite Nodularity Evaluation in High-Si Ductile Cast Irons

Synchrotron Measurements of Local Microstructure and Residual Strains in Ductile Cast Iron

Investigation of Material Properties Based on 3D Graphite Morphology for Compacted Graphite Iron

Relationships Between Macrostructure and Microstructure in Lamellar Graphite Iron Castings

Effects of graphite nodule count on mechanical properties and thermal conductivity of ductile iron

Vermicular and Chunky Graphite Nucleation during Chill Casting: Study on the Dynamics of Ductile Iron Recycling

Microstructure and rolling contact fatigue behavior of martensitic nodular cast irons with different graphite sizes and densities

Evaluation of Melt Quality and Graphite Degeneration Prediction in Heavy Section Ductile Iron

Fuzzy Neural Network Analysis on Gray Cast Iron with High Tensile Strength and Thermal Conductivity

Examples of Chunky Graphite Formation in Production of Ductile Iron Castings and Effective Countermeasures

Characterization of Microstructral Morphology of Austempered Ductile Iron by Electron Microscopy

Three-dimensional visualization and quantification of microporosity in aluminum castings by X-ray micro-computed tomography

3D characterization of closure of surface and internal fatigue cracks in nodular cast iron using Digital Volume Correlation of laboratory X-ray tomography images

Quantitative Analysis of 3D Pore Characteristics Effect on the Ductility of HPDC Al-10Si-0.3Mg Alloy through X-Ray Tomography

Effect of Purifying Agent on the Microstructure and Mechanical Properties of Nodular Graphite Cast Iron

Thermomechanical–microstructural modelling of nodular cast iron solidification