Abstract:Conventional thixoforming technology had advantages of casting and forging, but low plastic deformation degree and existence of liquid phase lowered the mechanical property. In this work, 6A02 bracket-shape component was firstly manufactured by the efficient thixoforming-forging compound forming technology and bimodal semisolid billet. Bimodal semisolid feedstock was beneficial for both filling ability and mechanical strength due to intragranular dislocation and elongated grain shape. Firstly, a Deform-3D simulation of compound forming was established by controlling temperature field distribution. Then the effects of billet shapes, billet temperatures, soaking times, mold temperatures and dwell times on microstructures and mechanical properties were investigated. Though the mechanical strength and ductility at the shoulder were elevated by larger plastic deformation in the integrated forming process, they were still lower than those at side wall and bottom part in virtue of liquid segregation. Besides, the largest yield strength σ y , tensile strength σ max and elongation δ of compound-formed 6A02 components were even 16.8%, 25.8%, and 77.6% higher than σ y , σ max and δ of 6A02 hot-extruded bar, respectively. Finally, the deformation behavior and strengthening mechanism of compound forming technology were discussed deeply. Particularly, except liquid fraction, deformation behavior was relevant with grain size and morphology. For rounder and smaller grains, grain boundary sliding was dominant. But slip deformation was predominant for large-deformed grains. Subsequently, a new dynamic recrystallization (DRX) mechanism was proposed and only continuous dynamic recrystallization (CDRX) could make the wet grain boundary serrated. A quantitative insight into strengthening mechanism indicated that solid solution strengthening and dislocation strengthening were dominant. This study provided a theoretical guidance and experimental support for the efficient application and forming control of 6A02 alloy in compound forming area.

Thixotropic-core compound forging for aluminum-steel bimetal gears

Interface Heterogeneity of Aluminum-Steel Bimetal Parts Manufactured Via Thixotropic-Core Compound Forging

Formation of metallurgical bonding interface in aluminum-steel bimetal parts by thixotropic-core compound forging

Thixoforming-forging compound forming technology for 6A02 Al bracket-shape component

A novel process for manufacturing spur gear with uniform microstructure and excellent strength-ductility synergy by warm mold continuous casting

Fabrication of Ti-43Al-5V-4Nb intermetallic compounds by forging using the blended elemental powders

Study on compound fabrication process of micro double gears using microforming

Study on Thxio-die-forging of 37%Al/Al_2O_3 Composite cup shell in Pseudo-semi-solid State

Integrated Manufacturing of Powder Metallurgy Preparation-Thixoforming for Al0.8Co0.5Cr1.5CuFeNi HEA: Excellent Formability and Enhancement by In-Situ Generated Al2O3 in Liquid Phase

The Improved Properties and Microstructure of Β-Solidify TiAl Alloys by Boron Addition and Multi Steps Forging Process

Feasibility of Al/Al_2O_3 Composite Thixoforming in Pseudo-semi-solid State

Microstructure and mechanical properties of thixoforged complex box-type component of 2A12 aluminum alloy

An innovative thermal simulation study of microstructure improvement by delay forging during solidification

Self-Lubricating Property of TiB2-Ni Coating in the Hot Forging Die of Aluminum Alloy

Preform Design and Microstructure-Property Analysis for Isothermal Extrusion of Complex Box-Shaped Components

Combination gear hot forging process and microstructure optimization

Isothermal Precision Forging of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si Alloy Impeller with Twisted Blades

Effects of multi-directional forging on the microstructure and mechanical properties of TiB2 particulate reinforced 6061Al composite

Microstructures, Mechanical Properties and Thixoformability of TiB 2 /Al Composite Prepared by Ultrasonic-Assisted Squeeze Casting

Improving Mechanical Properties of a Forged High-Manganese Alloy by Regulating Carbon Content and Carbide Precipitation

Microstructure and Mechanical Properties of Tial Alloys Produced by Rapid Heating and Open Die Forging of Blended Elemental Powder Compacts