Abstract:High-performance (Ti, Nb)B/Ti2AlNb composites are promising high-temperature structural materials for the new generation of aerospace engines. The interfaces between the (Ti, Nb)B reinforcement and matrix phases (i.e. O-Ti2AlNb, α2-Ti3Al and B2 phases) affect the mechanical properties of the composites largely. In this study, the properties of the interfaces were systematically revealed after fabricating a (Ti, Nb)B/Ti2AlNb composite by low-energy ball-milling and spark plasma sintering (SPS). A high-resolution transmission electron microscopy (HRTEM) was adopted to evaluate the crystallographic orientation relationships (ORs) and interfacial structures. (Ti, Nb)B maintains three coherent interfaces with the matrix, and the preferred ORs between them can be expressed as [1 1 <math>2¯</math> 0]α2//[0 1 0](Ti, Nb)B and (<math>1¯</math> 1 0 0)α2//(1 0 0)(Ti, Nb)B; [1 <math>1¯</math> 0]O//[0 1 0](Ti, Nb)B and (1 1 0)O//(1 0 0)(Ti, Nb)B; [1 <math>1¯</math> 1]B2//[0 1 0](Ti, Nb)B and (<math>1¯</math> 1 2)B2//(1 0 0)(Ti, Nb)B. The results of first-principles calculations indicated that the (<math>1¯</math> 1 0 0)α2/(1 0 0)(Ti, Nb)B interface possesses a higher bonding strength compared with the (1 1 0)O/(1 0 0)(Ti, Nb)B and (<math>1¯</math> 1 2)B2/(1 0 0)(Ti, Nb)B interfaces, and the (Ti, Nb)B reinforcement and the matrix are bonded through strong ionic bonds and weak covalent bonds. Moreover, based on Bramfitt's lattice mismatch theory, it was found that the (Ti, Nb)B reinforcement acts as an effective substrate in promoting the heterogeneous nucleation and preferred precipitation of the α2 phase. Suppressing the brittle α2 precipitate around the reinforcement improves the ductility of the composite obviously.

Anisotropic microstructure and mechanical properties of as-forged (Ti, Nb)B/Ti2AlNb composites

Effect of Multi-Directional Forging on the Microstructure and Mechanical Properties of TiBw/TA15 Composite with Network Architecture

Effect of forging on microstructural characteristic and tensile properties of in situ (TiB+TiC)/Ti composite

Effects of multi-directional forging on the microstructure and mechanical properties of TiB2 particulate reinforced 6061Al composite

Microstructure and Tensile Properties of 1-D Forged (tib+tic)/ti Composite

Effects of Forging Deformation on Variant Selection and Morphology of Α in TiB/near Α-Ti Composites

Relationships among reinforcement volume fraction, microstructure and tensile properties of (TiBw + TiCp)/Ti composites after (α + β) forging

Effect of Forging on Microstructure and Mechanical Properties of (TiB+TiC)/Ti Composite

Effect of Forging on Microstruture and Mechanical Properties of in Situ TiBw/Ti Composite

Effect of forging on microstruture and mechanical properties of in-situ TiBw/Ti composite

Research on tensile anisotropy of Ti-22Al-25Nb alloy isothermally forged in B2 phase region related with texture and variant selection

Microstructure and Mechanical Properties of in Situ TiB2•TiAl3/2024Al Composite Subjected to Multidirectional Forging

Mechanical Properties Anisotropy of Ti−6Al−4V Alloy Fabricated by Β Forging

The Improved Properties and Microstructure of Β-Solidify TiAl Alloys by Boron Addition and Multi Steps Forging Process

Microstructure and mechanical properties of in situ TiB 2 •TiAl 3 /2024Al composite subjected to multidirectional forging

Thermomechanical Processing of a Near-α Ti Matrix Composite Reinforced by TiBw

Anisotropic microstructures and mechanical properties of textured Ti3AlC2/TiAl3/Al composite

Microstructure Evolution During Forging Deformation of (Tib+tic+y2o3)/α-Ti Composite: DRX and Globularization Behavior

Crystallographic orientation relationships and interfacial structures between reinforcement and matrix phases in an in situ (Ti, Nb)B/Ti2AlNb composite

Synthesis of TiAl/Nb Composites with Concurrently Enhanced Strength and Plasticity by Powder Metallurgy

Improved Structural Homogeneity and Mechanical Properties of Nanoparticles Reinforced Al Composites after Orthogonal Thermomechanical Processes