Abstract:Zirconium diboride (ZrB2 ) is considered as one of the most promising ultra-high temperature materials for the applications in extreme environments. However, the difficulty in fabrication of ZrB2 limits its industrial applications. In this study, fully dense and grain-refined ZrB2 is prepared under ultra-high pressure of 15 GPa at low temperature of 1450 °C. The as-prepared ZrB2 exhibits excellent mechanical and oxidation-resistant properties. Compared with raw powder, the grain size decreases 56%. Compared with high-temperature sintered control specimen beyond 2000 °C, the hardness and fracture toughness increase about 46% and 69%, respectively, the dislocation density increase 3 orders of magnitude, while the grain size considerably decrease 96%. According to work hardening, Hall-Petch and Taylor dislocation hardening effects, the refined grains, substructures, and high dislocation density caused by plastic deformation during sintering can enhance the mechanical properties. The unique structure contributes to a threshold oxidation temperature increase of ≈250 °C relative to the high-temperature sintered ZrB2 , achieving one of the highest values (1100 °C) among the reported monolithic ultra-high temperature ceramics. A developed densification mechanism of dislocation multiplication with grain refining is proposed and proved to dominate the sintering, which is responsible for simultaneous improvements in mechanical and oxidation-resistant properties.

High Temperature Flexural Strength and Oxidation Behavior of Hot-Pressed B4C–ZrB2 Ceramics with Various ZrB2 Contents at 1000–1600 °C in Air

Influence of Zrc Content on the Elevated Temperature Tensile Properties of Zrcp/W Composites

High temperature oxidation resistance of hot-pressed h-BN/ZrO 2 composites

Pre-oxidation Temperature Optimization of Ultra-High Temperature Ceramic Components: Flexural Strength Testing and Residual Stress Analysis

Long‐term oxidation and ablation behavior of Cf/ZrB2–SiC composites at 1500, 2000, and 2200°C

High-Temperature Oxidation Resistance of ZrB2-SiC Ceramic Composites Prepared by Reactive Hot Pressing

Ultrahigh‐temperature tensile behaviors of ZrB2–SiC ceramics

Characterization of hot-pressed short carbon fiber reinforced ZrB2–SiC ultra-high temperature ceramic composites

High‐temperature tensile strength and fracture behavior of ZrB2‐SiC‐graphite composite

High-temperature deformation of ZrB2 ceramics with WC additive in four-point bending

Characterization of hot‐pressed ZrC–TiC composites

Preparation and flame ablation/oxidation behavior of ZrB2/SiC ultra-high temperature ceramic composites

Effects of ZrB2 on Mechanical Properties of Al2O3-ZrB2-SiC Composite Ceramics at Room Temperature

High‐strength medium‐entropy (Ti,Zr,Hf)C ceramics up to 1800°C

Enhanced Mechanical Properties and Oxidation Resistance of Zirconium Diboride Ceramics via Grain‐Refining and Dislocation Regulation

High-temperature oxidation and nitridation of substoichiometric zirconium carbide in isothermal air

Preparation and properties of zirconium diboride-based ultra-high temperature ceramics

Mechanical properties and fracture behavior of ultrahigh temperature ceramics at ultrahigh temperatures

Effect of high temperature heat treatment on ZrB2-SiC composites added with Yb2O3

In Situ ZrB2 Formation in B4C Ceramics and Its Strengthening Mechanism on Mechanical Properties

Microstructure, Mechanical Properties and Oxidation Behavior of Reactive Hot-Pressed (Zr,Ti)B2-SiC-ZrC Composites