Abstract:Abstract This paper presents a small-size on-chip capacitively coupled digital isolator with superior Common Mode Transient Immunity (CMTI) and high operational speed performances. It employs a gate-cross-coupled common gate pre-amplifier with an active zero load and a high-pass filter before the pre-amplifier. By applying the proposed technique, the high-frequency gain retains to high value, while the low-frequency gain is greatly attenuated. The high-pass filter, which is designed based on the technology structure of the on-chip isolation capacitance, is applied to further cancel the influence of Common Mode Transient (CMT) and aid in the transmission of high-frequency signal. Furthermore, differential On-Off Keying (OOK) modulation is adopted to eliminate CMT noise. For the purpose of increasing the operation speed performances, the work utilizes the Voltage-Current high-speed comparator with fast feed-forward path as Schmitt trigger and level shift, and employs the envelop-comparator, integrator and filter as demodulator. Thus, it significantly reduces the propagation delay and speeds up the data rate. As a result, both high CMTI and operational speed performances are achieved simultaneously. Fabricated in a 0.18 µm isolated CMOS technology, the area of the isolation element, i.e., the capacitor is 2×104 µm2. The measurement results of a test chip are an over 162 kV/µs CMTI, a 230 Mbps data rate, a 6 ns propagation delay, a 1.5 mA dynamic current and 14 kV isolation breakdown voltage. The characteristics are superior to those of conventional digital isolators.

Noise Immunity And Its Temperature Characteristics Study Of The Capacitive-Loaded Level Shift Circuit For High Voltage Gate Drive Ic

A Capacitively Coupled Digital Isolator with CMTI of 162 kV/μs and Data Rate of 230 Mbps

Research Of Designing For The High Voltage Device In Cmos Hv-Ic

Study and Implementation of 600-V High-Voltage Gate Driver IC With the Common-Mode Dual-Interlock Technique for GaN Devices

An Investigation on Capacitance-Trigger ESD Protection Devices for High Voltage Integrated Circuits

Design Techniques of Sub-ns Level Shifters With Ultrahigh dV/dt Immunity for Various Wide-Bandgap Applications

Capacitor Voltage Ripple Reduction of A 4-Level Hybrid Clamped Converter Using Switching State Redundancy for Medium-Voltage Drive

A novel heavily doped drift - auxiliary cathode lateral insulated gate transistor structure

Analysis and Flexible DV/DT Control of an Active Clamping Topology for Series-Connected SiC MOSFETs

High Temperature Gate Drive Circuit With Under Voltage Lock Out

Novel Capacitance Coupling Complementary Dual-Direction SCR for High-Voltage ESD

A voltage controlled current source gate drive method for IGBT devices

A New Double Epitaxial Layer Dielectric Isolation Technology For Hvics

A 400-V Half Bridge Gate Driver for Normally-off GaN HEMTs with Effective dv/dt Control and High dv/dt Immunity

A High Temperature Gate Drive Circuit for SiC MOSFET

Investigation on the Gate Bias Voltage of BigFET in Power-rail ESD Clamp Circuit for Enhanced Transient Noise Immunity

Improving dv/dt Immunity of Reverse Blocking IGCT for Hybrid Line-Commutated Converter

A 2.5-Vpp PVT-insensitive High Dynamic Range Output Stage Using Bulk Voltages Adjustment.

A 1200-V GaN/SiC cascode device with E-mode p-GaN gate HEMT and D-mode SiC junction field-effect transistor

High Frequency Switching of Sic High Voltage Ljfet

Characterization of Static and Dynamic Behavior of 1200 V Normally off GaN/SiC Cascode Devices