Abstract:Gasification, a highly efficient method, is under extensive investigation due to its potential to convert biomass and plastic waste into eco-friendly energy sources and valuable fuels. Nevertheless, there exists a gap in comprehension regarding the integrated thermochemical process of polystyrene (PS) and polypropylene (PP) and its capability to produce hydrogen (H 2 ) fuel. In this study a comprehensive process simulation using a quasi-equilibrium approach based on minimizing Gibbs free energy has been introduced. To enhance H 2 content, a water-gas shift (WGS) reactor and a pressure swing adsorption (PSA) unit were integrated for effective H 2 separation, increasing H 2 production to 27.81 kg/h. To investigate the operating conditions on the process the effects of three key variables in a gasification reactor namely gasification temperature, feedstock flow rate and gasification pressure have been explored using sensitivity analysis. Furthermore, several machine learning models have been utilized to discover and optimize maximum capacity of the process for H 2 production. The sensitivity analysis reveals that elevating the gasification temperature from 500 °C to 1200 °C results in higher production of H 2 up to 23 % and carbon monoxide (CO). However, generating H 2 above 900 °C does not lead to a significant upturn in process capacity. Conversely, an increase in pressure within the gasification reactor is shown to decrease the system capacity for generating both H 2 and CO. Moreover, increasing the mass flow rate of the gasifying agent to 250 kg/h in the gasification reactor has shown to be merely productive in process capacity for H 2 generation, almost a 5 % increase. Regarding pressure, the hydrogen yield decreases from 22.64 % to 17.4 % with an increase in pressure from 1 to 10 bar. It has been also revealed that gasification temperature has more predominant effect on Cold gas efficiency (CGE) compared to gasification pressure and Highest CGE Has been shown by PP at 1200 °C. Among the various machine learning models, Random Forest (RF) model demonstrates robust performance, achieving R 2 values exceeding 0.99.

Hydrogen‐Rich Syngas Production by DC Thermal Plasma Steam Gasification from Biomass and Plastic Mixtures

Analysis on low-temperature polyethylene pyrolysis and gasification in different atmospheres

Exploration on the steam gasification mechanism of waste PE plastics based on ReaxFF-MD and DFT methods

Hydrogen from Cellulose and Low-density Polyethylene via Atmospheric Pressure Nonthermal Plasma

Development of integrated reactive system based on co-combustion of wood biomass and plastic: Efficient hydrogen and methane production

Supercritical water Co-gasification of biomass and plastic wastes for hydrogen-rich gas production using Ni-Cu/AC-CaO catalyst

Enhanced hydrogen production using a tandem biomass pyrolysis and plasma reforming process

A novel sludge pyrolysis and biomass gasification integrated method to enhance hydrogen-rich gas generation

Gasification Performance of Cellulose in Horizontal Plasma Jet Reactor

Characterization of tar evolution during DC thermal plasma steam gasification from biomass and plastic mixtures: Parametric optimization via response surface methodology

Hydrogen production from plastic waste: A comprehensive simulation and machine learning study

Characteristics of Pyrolyzing Polyethylene in a Horizontal Plasma Jet Reactor

Analysis of hydrogen production potential from waste plastics by pyrolysis and in line oxidative steam reforming

Investigation on hydrogen-rich syngas production from catalytic co-pyrolysis of polyvinyl chloride (PVC) and waste paper blends

Hydrogen-rich gas production from biomass air and oxygen/steam gasification in a downdraft gasifier

Energy, efficiency, and environmental analysis of hydrogen generation via plasma co-gasification of biomass and plastics based on parameter simulation using Aspen plus

Hydrogen Production by Pyrolysis–Nonthermal Plasma/Catalytic Reforming of Waste Plastic over Different Catalyst Support Materials

Simulation of air-steam gasification of pine sawdust in an updraft gasification system for production of hydrogen-rich producer gas

On the operating parameters for hydrogen-rich syngas production in a plasma co-gasification process of municipal solid wastes and polypropylene using a constrained model in Aspen plus

Investigation of Hydrogen Production Using Wood Pellets Gasification with Steam at High Temperature over 800 °C to 1435 °C

Production of hydrogen-rich fuel gas from waste plastics using continuous plasma pyrolysis reactor