Abstract:Gasification, a highly efficient method, is under extensive investigation due to its potential to convert biomass and plastic waste into eco-friendly energy sources and valuable fuels. Nevertheless, there exists a gap in comprehension regarding the integrated thermochemical process of polystyrene (PS) and polypropylene (PP) and its capability to produce hydrogen (H 2 ) fuel. In this study a comprehensive process simulation using a quasi-equilibrium approach based on minimizing Gibbs free energy has been introduced. To enhance H 2 content, a water-gas shift (WGS) reactor and a pressure swing adsorption (PSA) unit were integrated for effective H 2 separation, increasing H 2 production to 27.81 kg/h. To investigate the operating conditions on the process the effects of three key variables in a gasification reactor namely gasification temperature, feedstock flow rate and gasification pressure have been explored using sensitivity analysis. Furthermore, several machine learning models have been utilized to discover and optimize maximum capacity of the process for H 2 production. The sensitivity analysis reveals that elevating the gasification temperature from 500 °C to 1200 °C results in higher production of H 2 up to 23 % and carbon monoxide (CO). However, generating H 2 above 900 °C does not lead to a significant upturn in process capacity. Conversely, an increase in pressure within the gasification reactor is shown to decrease the system capacity for generating both H 2 and CO. Moreover, increasing the mass flow rate of the gasifying agent to 250 kg/h in the gasification reactor has shown to be merely productive in process capacity for H 2 generation, almost a 5 % increase. Regarding pressure, the hydrogen yield decreases from 22.64 % to 17.4 % with an increase in pressure from 1 to 10 bar. It has been also revealed that gasification temperature has more predominant effect on Cold gas efficiency (CGE) compared to gasification pressure and Highest CGE Has been shown by PP at 1200 °C. Among the various machine learning models, Random Forest (RF) model demonstrates robust performance, achieving R 2 values exceeding 0.99.

Production of hydrogen-rich fuel gas from waste plastics using continuous plasma pyrolysis reactor

Pyrolysis-plasma/catalytic reforming of post-consumer waste plastics for hydrogen production

Gas Production from Polyethylene Terephthalate Using Rotating Arc Plasma

From plastic waste pyrolysis to Fuel: Impact of process parameters and material selection on hydrogen production

An Investigation of a Hybrid Plasma Gasification System for Various Waste Plastics Thermochemical Degradation in the Fuel Extraction Process

Hydrogen Production by Pyrolysis–Nonthermal Plasma/Catalytic Reforming of Waste Plastic over Different Catalyst Support Materials

From Waste to Energy: Enhancing Fuel and Hydrogen Production through Pyrolysis and In-Line Reforming of Plastic Wastes

Defossilization and decarbonization of hydrogen production using plastic waste: Temperature and feedstock effects during thermolysis stage

Three-stage pyrolysis–steam reforming–water gas shift processing of household, commercial and industrial waste plastics for hydrogen production

Analysis of hydrogen production potential from waste plastics by pyrolysis and in line oxidative steam reforming

Hydrogen from Cellulose and Low-density Polyethylene via Atmospheric Pressure Nonthermal Plasma

Pyrolysis as a value added method for plastic waste management: A review on converting LDPE and HDPE waste into fuel

Hydrogen and aromatics recovery through plasma-catalytic pyrolysis of waste polypropylene

Pyrolytic conversion of waste plastics to energy products: A review on yields, properties, and production costs

Nonthermal Atmospheric Plasma Reactors for Hydrogen Production from Low-Density Polyethylene

Hydrogen Production by Steam Reforming of Pyrolysis Oil from Waste Plastic over 3 wt.% Ni/Ce-Zr-Mg/Al2O3 Catalyst

Feasibility of waste-to-hydrogen generation system based on gasification/pyrolysis: a comprehensive review of experimental studies

A review on catalytic pyrolysis of plastic wastes to high-value products

Hydrogen production from plastic waste: A comprehensive simulation and machine learning study

Hydrogen Production by Three-Stage (i) Pyrolysis, (ii) Catalytic Steam Reforming, and (iii) Water Gas Shift Processing of Waste Plastic

Pyrolysis of plastic species: A review of resources and products