Abstract:The modeling of stator and rotor faults is the basis of the development of online monitoring techniques. To obtain reliable stator and rotor fault models, this paper focuses on dynamic modeling of the stator and rotor faults in real-time, which adopts a multiple-coupled-circuit method by using a winding function approach for inductance calculation. Firstly, the model of the induction machine with a healthy cage is introduced, where a rotor mesh that consists of a few rotor loops and an end ring loop is considered. Then, the stator inter-turn fault model is presented by adding an extra branch with short circuit resistance on the fault part of a stator phase winding. The broken rotor bar fault is then detailed by merging and removing the broken-bar-related loops. Finally, the discrete models under healthy and faulty conditions are developed by using the Tustin transformation for digital implementation. Moreover, the stator and rotor mutual inductances are derived as a function of the rotor position according to the turn and winding functions distribution. Simulations and experiments are performed on a 2.2-kW/380-V/50-Hz three-phase and four-pole induction motor to show the performance of the stator and rotor faults, where the saturation effect is considered in simulations by exploiting the measurements of a no load test. The simulation results are in close agreement with the experimental results. Furthermore, magnitudes of the characteristic frequencies of 2f1 in torque and (1 ± 2s)f1 in current are analyzed to evaluate the stator and rotor fault severity. Both indicate that the stator fault severity is related to the short circuit resistance. Further, the number of shorted turns and the number of continuous broken bars determines the rotor fault severity.

Modeling of Coupled Capacitances and Bearing Voltage in Induction Motors Fed by Inverters Based on Numerical Calculation of Electromagnetic Field

Practical Induction Motor Model with Consideration of Frequency Variation

FEA-Based Mathematical Modeling and Simulation for IPMSM Drive with Consideration of Saturation and Cross-Coupling Influence

Modeling of Common-Mode Current in Motor Cable of Inverter-Fed Motor Drive System

Extraction of Common-Mode Impedance of an Inverter-Fed Induction Motor

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

Transient analysis of PWM inverter-fed AC motor drives using finite element method coupling with external circuit model

Modeling of Common-Mode Impedance of an Inverter-Fed Induction Motor from Online Measurement

Investigation of Analytical Models for Surface-Mounted Permanent Magnet Motor Using Voltage Source Inverter

Calculation and Analysis of Electromagnetic Field in A Variable-Frequency Induction Motor with Constant Torque

Influence of Motor Cable on Common-Mode Currents in an Inverter-Fed Motor Drive System

Research on Induction Motor Shaft Voltage and Shaft Current in PWM Drive System

Research on Bearing Current Detection Method of High-speed Motor Driven by PWM Inverter

Calculation and Measurement of Parameters of A Multiphase Induction Motor

Analytical Optimization of the Bearing Voltage of Motor Considering the Thickness of Insulating Coating: an Improved Equivalent Circuit Model

The Bearing Current Of Inverter-Fed Induction Motors: The Reason And Solution

Dynamics modeling and electromechanical coupling characteristics analysis of cage induction motors

Time-frequency Characteristics Research of Common Mode Current in PWM Motor System

Voltage Distribution Analysis of High Dv/dt Fed Machines Using High Frequency Winding Model

Analysis and Calculation of Three-dimensional Temperature Field of Inverter-fed Traction Motor

Performance Analysis of Multiphase Induction Motor Drive