Abstract:We propose a hierarchical multiscale modeling approach to simulate the hydro-mechanical coupling behavior in saturated high-porosity sandstone, with a particular focus on the occurrence and transition of compaction bands. In this multiscale approach, we use the finite element method (FEM) to solve the global boundary value problem for a sandstone, and the discrete element method (DEM) to solve the local representative volume elements (RVEs) embedded at the Gauss integration points of the FE mesh to provide the effective material constitutive responses required for FEM. The global governing equations for a coupled hydro-mechanical problem are solved with the standard u–p formulation, where the total stress is decomposed into the pore pressure and the effective stress which is directly derivable from the DEM solution of the RVEs, according to the seminal Terzaghi's effective stress principle. By choosing proper RVEs to represent the typical microstructure of high-porosity sandstone, we perform both drained and undrained simulations on saturated sandstone specimens to examine localized compactive failures developed therein. We identify that both mean effective stress and porosity control critically the initiation and development of failure modes in sandstone. Under undrained shear, our simulations show that a sandstone specimen may first develop a compaction band followed by a gradual transition to a shear-enhanced compaction band and even shear band, with the build-up of excessive pore pressure and hence drop of mean effective stress. In the specimen, regions experiencing localized volumetric contraction show relatively higher pore pressure than other regions and act as the source of flux flow. The Darcy flux peaks during the formation of compaction band and decreases gradually in the following stages. To distinguish the different failure stages with distinct physical attributes, the ratio of deviatoric strain to volumetric strain is adopted as a useful indicator signifying the underlying microstructural mechanisms for different deformation bands. This study signifies the importance of considering pore pressure and mean effective stress in fluid-involved engineering operations, e.g. aquifer management, hydrocarbon extraction and CO2 geological sequestration.

Shear Wave Velocity in Sand Considering the Effects of Frequency Based on Particle Contact Theory

Shear wave velocity in sand based on microscopic size

Experimental Study on Dispersion Property of Gas-bearing Shaly Sand

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

Multiscale Modeling and Analysis of Compaction Bands in High-Porosity Sandstones

On unified characterization of wave velocity of sand: A focus on effect of particle shape

Measurement of Small Strain Shear Modulus of Clean and Natural Sands in Saturated Condition Using Bender Element Test

ANALYSIS OF ELASTIC WAVE PROPAGATION IN SANDSTONE SATURATED BY TWO IMMISCIBLE FLUIDS

Experimental study on shear wave velocity of sand-gravel mixtures considering the effect of gravel content

Numerical Simulations of Wave-Induced Soil Erosion in Silty Sand Seabeds

Wave propagation characteristics of fluid-containing soil granular materials at different frequencies under multiple dissipation mechanisms: A case study on calcareous sand in the South China Sea

Determination of Shear Wave Velocity in Granular Materials by Shear Vibration Within Discrete Element Simulation

Shear-band of sand simulated by Particle Flow Code (PFC)

EXPERIMENT AND DISCRETE ELEMENT NUMERICAL SIMULATION FOR INFLUENCE OF PARTICLE MORPHOLOGY ON SHEAR STRENGTH OF SAND

Laboratory Study of Fluid Viscosity Induced Ultrasonic Velocity Dispersion in Reservoir Sandstones

A Nonlinear Viscoelastic Model for Wave Propagation in Porous Sandstones Under Uniaxial Loads

Effects of Ellipsoidal Heterogeneities on Wave Propagation in Partially Saturated Double-Porosity Rocks

Shear Wave Speed Dispersion Characteristics of Seafloor Sediments in the Northern South China Sea

Effect of Multiscale Cracks on Seismic Wave Propagation in Tight Sandstones

Experimental Research on Shear Rheological Mechanical Properties of Water-bearing Sand Layer

The Quantitative Prediction of Ultrasonic Compressive Wave Velocity Dispersion for Fluid Saturated Reservoir Sandstone