Abstract:We propose a hierarchical multiscale modeling approach to simulate the hydro-mechanical coupling behavior in saturated high-porosity sandstone, with a particular focus on the occurrence and transition of compaction bands. In this multiscale approach, we use the finite element method (FEM) to solve the global boundary value problem for a sandstone, and the discrete element method (DEM) to solve the local representative volume elements (RVEs) embedded at the Gauss integration points of the FE mesh to provide the effective material constitutive responses required for FEM. The global governing equations for a coupled hydro-mechanical problem are solved with the standard u–p formulation, where the total stress is decomposed into the pore pressure and the effective stress which is directly derivable from the DEM solution of the RVEs, according to the seminal Terzaghi's effective stress principle. By choosing proper RVEs to represent the typical microstructure of high-porosity sandstone, we perform both drained and undrained simulations on saturated sandstone specimens to examine localized compactive failures developed therein. We identify that both mean effective stress and porosity control critically the initiation and development of failure modes in sandstone. Under undrained shear, our simulations show that a sandstone specimen may first develop a compaction band followed by a gradual transition to a shear-enhanced compaction band and even shear band, with the build-up of excessive pore pressure and hence drop of mean effective stress. In the specimen, regions experiencing localized volumetric contraction show relatively higher pore pressure than other regions and act as the source of flux flow. The Darcy flux peaks during the formation of compaction band and decreases gradually in the following stages. To distinguish the different failure stages with distinct physical attributes, the ratio of deviatoric strain to volumetric strain is adopted as a useful indicator signifying the underlying microstructural mechanisms for different deformation bands. This study signifies the importance of considering pore pressure and mean effective stress in fluid-involved engineering operations, e.g. aquifer management, hydrocarbon extraction and CO2 geological sequestration.

A Nonlinear Viscoelastic Model for Wave Propagation in Porous Sandstones Under Uniaxial Loads

Multiscale Modeling and Analysis of Compaction Bands in High-Porosity Sandstones

Seismic Wave Propagation in Viscoelastic and Saturated Rock

Modelling of Non-Linear Elastic Constitutive Relationship and Numerical Simulation of Rocks Based on the Preisach-Mayergoyz Space Model

ANALYSIS OF ELASTIC WAVE PROPAGATION IN SANDSTONE SATURATED BY TWO IMMISCIBLE FLUIDS

A dual‐porosity model incorporating uniaxial stress effect and its application in wave velocity estimation with well‐logging data

Stress Wave Propagation in Viscoelastic-Plastic Rock-Like Materials

Analytical Time-Domain Solution of Plane Wave Propagation Across A Viscoelastic Rock Joint

Theoretical Analysis of Longitudinal Wave Attenuation in a Stressed Rock With Variable Cross-Section

Viscoelastic Bisq Model for Low-Permeability Sandstone with Clay

A nonlinear visco-elasto-plastic creep model for sandstone considering creep initiation conditions and experimental verification

Nonlinear viscoelastic wave propagation: an extension of Nearly Constant Attenuation (NCQ) models

Extended Gassmann equation with dynamic volumetric strain: Modeling wave dispersion and attenuation of heterogeneous porous rocks

The nonlinear energy model and stress–strain model of sandstone

Numerical simulation of plane wave propagation in a semi-infinite media with a linear hardening plastic constitutive model

Effect of Multiscale Cracks on Seismic Wave Propagation in Tight Sandstones

Experimental and Mesoscale Analysis on Wave Propagation Induced by Impact in Dry Silica Sand

A New Anelasticity Model for Wave Propagation in Partially Saturated Rocks

A double double-porosity model for wave propagation in patchy-saturated tight sandstone with fabric heterogeneity

Nonlinear Dynamic Constitutive Model of Frozen Sandstone Based on Weibull Distribution

A Unified Model Including Non-Darcy Flow and Viscoelastic Mechanisms in Tight Rocks