Abstract:This article presents a novel Dickson hybrid boost converter for thermoelectric energy harvesting that utilizes a fixed ratio switched-capacitor (SC) converter combined with a traditional switched-inductor design. This unique approach makes high conversion ratio (CR) more attainable. Besides, the converter features an on-chip LC oscillator for cold-starting the harvester without requiring any external components. To improve the efficiency of the harvester, a lookup table-based maximum power point tracking (MPPT) and a zero current detection (ZCD) circuit are also implemented. The prototype was designed and fabricated using the 55 nm low power (LP) CMOS process, with a compact 5.6- mu H inductor. Measurement results verify that the harvester can cold start at an open-circuit voltage ofV (TG) = 110mV, achieve a peak efficiency of 90.5% atV (TG) = 140mV, and maintain operation at a 5-mV input voltage with a 200-nA load. Furthermore, the converter maintains end-to-end efficiencies above 80% for a wide range ofV (TG) = 40 similar to 200mV. With a wide input range of 5 similar to 100mV and load range of 200nA similar to 4.52mA, the proposed converter represents a significant improvement in performance over previous state-of-the-art designs, with a decent power efficiency, compact form factor and wide output power range.

A Single-Inductor MIMO Buck-Boost Converter with Inductor-Peak-Current PFM Control for Multiple Energy Harvesting

A Single Inductor Tri-Input Dual-Output Buck-Boost DC-DC Converter with MPPT for Multi-Source Energy Harvesting.

Design and Implementation of High-Efficiency and Low-Power DC-DC Converter with PWM/PFM Modes

Analysis of a Coupled Inductor Boost Three-Port Converter with High Voltage Gain for Renewable Energy Systems

An Integrated Inductive Power Transfer System Design with a Variable Inductor for Misalignment Tolerance and Battery Charging Applications

Coupled Inductor Based Zero-Voltage-switching Buck/boost Converter

A Low-Voltage Self-Starting Boost Converter Using MPPT with Pulse Multiplication for Energy Harvesting

A 90% peak efficiency single-inductor dual-output buck-boost converter with extended-PWM control

Three-Port Power Electronic Interface With Decoupled Voltage Regulation and MPPT in Electromagnetic Energy Harvesting Systems

A High Efficiency Single-Inductor Dual-Output Buck Converter With Adaptive Freewheel Current And Hybrid Mode Control

Ultra-Low Power Boost Converter with Constant On-Time-Based Mppt for Energy Harvesting Applications

The MPPT Application of the FSBB Converter with MHz ZVS Digital Control

Performance Analysis of Coupled Inductor Based Multiple-Input DC/DC Converter with PWM Plus Phase-Shift (PPS) Control Strategy

A Triple-Mode DC–DC Converter with Wide Input and Load Ranges for Energy Harvesting in IoT Edge Nodes

A Compact Dickson Hybrid Boost Converter with 5-Mv Input 90.5% Peak Efficiency and On-Chip Cold-Start for Thermoelectric Energy Harvesting

Single-Inductor–Multiple-Tier Regulation: TSV-Inductor-Based On-Chip Buck Converters for 3-D IC Power Delivery

A Dickson Hybrid Boost Converter With On-Chip Cold-Start for Thermoelectric Energy Harvesting.

A Single-Inductor Dual-Output Buck Converter with Self-Adapted PCCM Method

30–300mV input, ultra-low power, self-startup DC-DC boost converter for energy harvesting system

A 96.1% Efficiency Single-Inductor Multiple-Output (SIMO) Buck Converter With 2.1-A/ns Transient Speed and 2.2-A Maximum Current Capacity

Three Phase PFC Converter with Multilevel Inductive Switching Network