Abstract:Improving battery longevity in portable devices usually requires the use of different voltage levels with a wide range of load capability for various functional blocks. Since a single-inductor-multiple-output (SIMO) converter can support multiple output voltages while using only one inductor, it is an excellent candidate to minimize the component count and thus the production cost. However, the cross-regulation and power consumption are two main issues of the previously reported SIMO converters [1-5]. Although pseudo-continuous conduction-mode (PCCM) control with a freewheel period [1] tries to augment power density and eliminate cross-regulation, associated power dissipation of freewheel switch exacerbates its overall efficiency. The charge-control technique with energy recovery presented [2] decouples the output channels between each switching cycle, at the expense of additional switching loss and slow response. The comparator-based controlled SIMO converters are investigated in [3, 4] and the cross-regulation in most channels is improved due to the fast response of the comparator. However, since the channel that is last connected to inductor is inevitably regulated by the accumulative error of all channels to balance the overall inductor current, every load transition at other outputs will introduce serious cross-regulation [3] and load-regulation problem [4] in the channel. In addition, cross-regulation and slow response also limit the application of dynamic voltage scaling (DVS) technique, which is widely used in single-output converters to improve the system power efficiency by providing variable voltage with fast reference tracking.

A 90% peak efficiency single-inductor dual-output buck-boost converter with extended-PWM control

PWM/PSM Dual-Mode Controller for High Efficiency DC-DC Buck Converter

A 750Ma,dual-Mode PWM/PFM Step-Down DC-DC Converter with High Efficiency

A Low Cross Regulation Single-Inductor Multi-Output DCDC Converter

High voltage PWM/PSM dual-mode asynchronous BUCK converter

Design and Implementation of High-Efficiency and Low-Power DC-DC Converter with PWM/PFM Modes

4.3 an 87%-Peak-efficiency DVS-capable Single-Inductor 4-Output DC-DC Buck Converter with Ripple-Based Adaptive Off-Time Control.

A High Efficiency Single-Inductor Dual-Output Buck Converter With Adaptive Freewheel Current And Hybrid Mode Control

A Single-inductor Dual-output Buck DC-DC Converter with Adaptive Dead Time Adjustment and Dynamic Voltage Scaling

A 96.1% Efficiency Single-Inductor Multiple-Output (SIMO) Buck Converter With 2.1-A/ns Transient Speed and 2.2-A Maximum Current Capacity

A Single-Inductor Dual-Output Buck Converter with Self-Adapted PCCM Method

A Light-load-efficiency-enhancing Strategy for Single-inductor Dual-output Buck-boost Converter

A Simplified Implementation With Improved Dynamic Performance of PWM Plus Phase-Shift Control for Four-Switch Buck-Boost Converter

A Single Inductor Tri-Input Dual-Output Buck-Boost DC-DC Converter with MPPT for Multi-Source Energy Harvesting.

A single-inductor multiple-bipolar-output (SIMBO) converter with fully-adaptive feedback matrix and improved light-load ripple

A Dual-Mode Single-Inductor Dual-Output Dc-Dc Converter With Fast Transient Response

A 4 MHz Digital Single Inductor Dual Outputs Buck/boost DC-DC Converter with 10-Bit ΣΔ Digital Pulse Width Modulation

Performance Analysis of Coupled Inductor Based Multiple-Input DC/DC Converter with PWM Plus Phase-Shift (PPS) Control Strategy

Quasi-SM Controller for SIDO Buck Converter with Self-Adaptive Free-Wheeling Current Level

A 60-Na IQ 96.5% Peak Efficiency Buck Converter with Wide Load Range for Internet of Things

A Single-Inductor Dual-Output Switching Converter with Average Current Mode Control