Abstract:Improving battery longevity in portable devices usually requires the use of different voltage levels with a wide range of load capability for various functional blocks. Since a single-inductor-multiple-output (SIMO) converter can support multiple output voltages while using only one inductor, it is an excellent candidate to minimize the component count and thus the production cost. However, the cross-regulation and power consumption are two main issues of the previously reported SIMO converters [1-5]. Although pseudo-continuous conduction-mode (PCCM) control with a freewheel period [1] tries to augment power density and eliminate cross-regulation, associated power dissipation of freewheel switch exacerbates its overall efficiency. The charge-control technique with energy recovery presented [2] decouples the output channels between each switching cycle, at the expense of additional switching loss and slow response. The comparator-based controlled SIMO converters are investigated in [3, 4] and the cross-regulation in most channels is improved due to the fast response of the comparator. However, since the channel that is last connected to inductor is inevitably regulated by the accumulative error of all channels to balance the overall inductor current, every load transition at other outputs will introduce serious cross-regulation [3] and load-regulation problem [4] in the channel. In addition, cross-regulation and slow response also limit the application of dynamic voltage scaling (DVS) technique, which is widely used in single-output converters to improve the system power efficiency by providing variable voltage with fast reference tracking.

A Light-load-efficiency-enhancing Strategy for Single-inductor Dual-output Buck-boost Converter

Design and Implementation of High-Efficiency and Low-Power DC-DC Converter with PWM/PFM Modes

PWM/PSM Dual-Mode Controller for High Efficiency DC-DC Buck Converter

A 750Ma,dual-Mode PWM/PFM Step-Down DC-DC Converter with High Efficiency

High voltage PWM/PSM dual-mode asynchronous BUCK converter

A High Efficiency Single-Inductor Dual-Output Buck Converter With Adaptive Freewheel Current And Hybrid Mode Control

A 88.3%-91.2% Efficient Buck DC-DC Converter in 0.5um CMOS

A 90% peak efficiency single-inductor dual-output buck-boost converter with extended-PWM control

A Single-Inductor Dual-Output Buck Converter with Self-Adapted PCCM Method

4.3 an 87%-Peak-efficiency DVS-capable Single-Inductor 4-Output DC-DC Buck Converter with Ripple-Based Adaptive Off-Time Control.

A High-Efficiency Double Step Down Converter with Dual-Mode Control and Seamless Mode Transition in A Wide Load Current Range

An LDO/PFM dual-mode automatic switching method used in buck DC-DC converters

Light-Load Efficiency Improvement of MHz RDCX Based on Output Voltage Ripple and Resonant Pulse Number Control

Multi-mode control strategy in three-level DC-DC converter for higher efficiency operation under light-load and standby conditions

A 2 MHz buck converter with dual-mode control for Power Management Unit

A Single-inductor Dual-output Buck DC-DC Converter with Adaptive Dead Time Adjustment and Dynamic Voltage Scaling

Decoupled Dual-PWM Control for Naturally Commutated Current-Fed Dual-Active-Bridge DC/DC Converter

A 96.1% Efficiency Single-Inductor Multiple-Output (SIMO) Buck Converter With 2.1-A/ns Transient Speed and 2.2-A Maximum Current Capacity

Light-load efficiency optimization for module integrated converters in photovoltaic systems

A single-inductor multiple-bipolar-output (SIMBO) converter with fully-adaptive feedback matrix and improved light-load ripple

A 1500ma, 10mhz On-Time Controlled Buck Converter with Ripple Compensation and Efficiency Optimization