Abstract:Improving battery longevity in portable devices usually requires the use of different voltage levels with a wide range of load capability for various functional blocks. Since a single-inductor-multiple-output (SIMO) converter can support multiple output voltages while using only one inductor, it is an excellent candidate to minimize the component count and thus the production cost. However, the cross-regulation and power consumption are two main issues of the previously reported SIMO converters [1-5]. Although pseudo-continuous conduction-mode (PCCM) control with a freewheel period [1] tries to augment power density and eliminate cross-regulation, associated power dissipation of freewheel switch exacerbates its overall efficiency. The charge-control technique with energy recovery presented [2] decouples the output channels between each switching cycle, at the expense of additional switching loss and slow response. The comparator-based controlled SIMO converters are investigated in [3, 4] and the cross-regulation in most channels is improved due to the fast response of the comparator. However, since the channel that is last connected to inductor is inevitably regulated by the accumulative error of all channels to balance the overall inductor current, every load transition at other outputs will introduce serious cross-regulation [3] and load-regulation problem [4] in the channel. In addition, cross-regulation and slow response also limit the application of dynamic voltage scaling (DVS) technique, which is widely used in single-output converters to improve the system power efficiency by providing variable voltage with fast reference tracking.

A single-inductor multiple-bipolar-output (SIMBO) converter with fully-adaptive feedback matrix and improved light-load ripple

A Low Cross Regulation Single-Inductor Multi-Output DCDC Converter

Design and Implementation of High-Efficiency and Low-Power DC-DC Converter with PWM/PFM Modes

A 750Ma,dual-Mode PWM/PFM Step-Down DC-DC Converter with High Efficiency

A Multimode Digital Controller IC for Flyback Converter with High Accuracy Primary-Side Feedback

4.3 an 87%-Peak-efficiency DVS-capable Single-Inductor 4-Output DC-DC Buck Converter with Ripple-Based Adaptive Off-Time Control.

A 96.1% Efficiency Single-Inductor Multiple-Output (SIMO) Buck Converter With 2.1-A/ns Transient Speed and 2.2-A Maximum Current Capacity

A 90% peak efficiency single-inductor dual-output buck-boost converter with extended-PWM control

A Single-Inductor Dual-Output Switching Converter with Low Ripples and Improved Cross Regulation

A Light-load-efficiency-enhancing Strategy for Single-inductor Dual-output Buck-boost Converter

A Single-inductor Dual-output Buck DC-DC Converter with Adaptive Dead Time Adjustment and Dynamic Voltage Scaling

Single-Inductor Multiple-Input Multiple-Output Converter With Common Ground, High Scalability, and No Cross-Regulation

A 4 MHz Digital Single Inductor Dual Outputs Buck/boost DC-DC Converter with 10-Bit ΣΔ Digital Pulse Width Modulation

A High Efficiency Single-Inductor Dual-Output Buck Converter With Adaptive Freewheel Current And Hybrid Mode Control

A Single-Inductor Dual-Output Buck Converter with Self-Adapted PCCM Method

Compensated Single Input Multiple Output Flyback Converter

Deadbeat Control for Single-Inductor Multiple-Output DC–DC Converter With Effectively Reduced Cross Regulation

An Improved Boost-Type Hybrid Converter with Multiple Outputs

A Simplified Implementation With Improved Dynamic Performance of PWM Plus Phase-Shift Control for Four-Switch Buck-Boost Converter

A Dual-Mode Single-Inductor Dual-Output Switching Converter With Small Ripple

Symmetrical Bipolar Output Isolated Four-Port Converters Based on Center-Tapped Winding for Bipolar DC Bus Applications