Abstract:The threshold voltage modulation of carbon nanotube thin-film transistors (TFTs) and flexible three-dimensional (3D) integration circuits has become hot research topics for carbon-based electronics. In this paper, a doping-free gate electrode technology is introduced to significantly modulate the threshold voltage of polymer-sorted semiconducting single-walled carbon nanotube (sc-SWCNT) TFTs in combination with the highly effective gate-controlling ability of solid-state electrolyte thin films as the dielectrics. A systematic investigation was conducted on the impact of printed silver, evaporated silver, and evaporated aluminum (Al) gate electrodes on the threshold voltage of flexible printed bottom-gate and top-gate SWCNT TFTs. The results indicate that the SWCNT TFTs with Al gate electrodes exhibit enhancement-mode characteristics with excellent electrical properties, such as the negative threshold voltages (−0.6 V), high Ion/Ioff (up to 106), low subthreshold swing (61.4 mV · dec−1), and small hysteresis. It is attributed to either the formation of lower work function thin films (Al2O3) at the electrode/dielectric layer interfaces through the natural oxidation of the Al bottom-gate electrodes or the dipole reaction of the Al top-gate electrodes from X-ray photoelectron spectroscopy (XPS) and ultraviolet photoelectron spectroscopy (UPS) data. In addition, 3D complementary metal-oxide-semiconductor (CMOS) inverters with common gate electrodes were constructed using the resulting enhancement-mode P-type SWCNT TFTs and matched N-type SWCNT TFTs, which shows high voltage gain (34), rail-to-rail output and high noise margins (80.04

A Carbon Nanotube Electrode A-Igzo-Tft

High-performance Carbon Nanotube/ingazno Composite Thin Film Transistors and Concentration Effect

Design and Mechanism of Embedding Specific Carbon Nanotubes in Sputtered Sandwiched InGaZnO Thin-Film Transistors

Influence of Source and Drain Contacts on the Properties of Indium-Gallium Zinc-Oxide Thin-Film Transistors Based on Amorphous Carbon Nanofilm As Barrier Layer

Indium Gallium Zinc Oxide - Carbon Nanotube Composite Thin Film Transistor

High mobility amorphous InGaZnO thin film transistor with single wall carbon nanotubes enhanced-current path

A novel thin-film transistor using carbon nanotubes as both channel and electrodes

Embedding Langmuir-Blodgett Carbon Nanotube Array to Enhance Performance of Amorphous InGaZnO Thin Film Transistor

Annealing Temperature Optimization for High-Performance Carbon Nanotube Thin Film Transistors

Transparent All-Carbon-Nanotube Thin-film Transistors

Flexible Printed Three Dimensional (3D) Integrated Carbon Nanotube Complementary Metal Oxide Semiconductor (CMOS) Thin Film Transistors and Circuits

Low-temperature, High-Mobility Solution-Processed P-Channel Thin-Film Transistors with Semiconducting Single-Walled Carbon Nanotube/nio X Composites

Fully transparent solution-processed carbon nanotube thin film transistors on a flexible substrate

Carbon Nanotube Nonvolatile Thin-Film Transistors with (bi,nd)(4)ti3o12 Gate Insulators

Crystalline InGaZnO quaternary nanowires with superlattice structure for high-performance thin-film transistors

On-current Tunable Carbon Nanotube Thin-Film Transistor by SiO2 Passivation Layer

Carbon Nanotube Thin Film Transistors Fabricated by an Etching Based Manufacturing Compatible Process

Effect of Post Treatment For Cu-Cr Source/Drain Electrodes on a-IGZO TFTs.

Carbon Nanotube Network Film-Based Field-Effect Transistor Interface State Optimization by Ambient Air Annealing

Performance Enhancement Of Carbon Nanotube Thin Film Transistor By Yttrium Oxide Capping

Integration and Characterization of Transparent Thin Film Transistors with Carbon Nanotubes As Aligned Channel and Electrodes