Abstract:Wide bandgap semiconductors show superior material properties enabling silicon carbide (SiC) metal-oxide-semiconductor field-effect transistors (MOSFETs) present good features on its switching speed and withstand voltage. However, the high voltage and fast switching characteristics of SiC MOSFETs also put forward new requirements for voltage measurement, that is, high bandwidth under high voltage conditions. This article proposes a new voltage divider structure and a proactive parameter design compensation network to build high voltage and high bandwidth voltage sensing circuit. This structure utilizes the characteristics that the same resistor has the same parasitic capacitance to meet the high frequency constraints of the voltage sensing circuit. The influence of parasitic parameters and load parameters on circuit performance is analyzed in detail, which provides a basis for the compensation network design. By combining the proposed voltage sensing circuit with an appropriate proactive parameter design load effect compensation network (PDCN), the withstand voltage rating of the low-voltage and high-bandwidth voltage probes can be extended to required levels. Different from other existing methods, PDCN can actively design the compensation circuit parameters and provide the optimal parameters of the compensation circuit. This lead to a smaller input capacitance than the state of the art commercial voltage probes, which will help to obtain better performance when measuring high-speed switching voltage. The performance of the voltage measurement is experimentally verified and compared by SiC-based double pulse test (DPT) circuits.

Voltage Suppression in Wire-Bond-Based Multichip Phase-Leg SiC MOSFET Module Using Adjacent Decoupling Concept

Analysis of A Low-Inductance Packaging Layout for Full-Sic Power Module Embedding Split Damping

Design of Low Parasitic Inductance SiC MOSFETs Halfbridge Power Modules

Suppression Switching Ringing of SiC-MOSFET Inverters with Combined Design of DC Bus Snubber and Gate Drive

Fan-Out Panel-Level PCB-Embedded SiC Power MOSFETs Packaging

A Low-Inductance Packaging Layout for 1.2kv, 40A Full-SiC Power Module Embedding Split Damping Capacitors

A Novel SiC MOSFET Module for High-power Soft-switching Converter

A Highly Integrated Multichip SiC MOSFET Power Module With Optimized Electrical and Thermal Performances

A Compact Gate Control and Voltage-Balancing Circuit for Series-Connected SiC MOSFETs and Its Application in a DC Breaker

Performance of a 1.2kV, 288A full-SiC MOSFET module based on low inductance packaging layout

A Low-Cost High-Performance Voltage Sensing Circuit with Proactive Parameter Design Compensation Network for SiC MOSFETs.

A Novel Gate Control Strategy for 3.4kv Cascade Sic Mosfets Stack

Simultaneous Mitigation of Switching Overvoltage and Oscillation for SiC MOSFET via Gate Charge Injection Concept

Overvoltage and Oscillation Suppression Circuit With Switching Losses Optimization and Clamping Energy Feedback for SiC MOSFET

Analysis and Suppression for Gate Oscillation Caused by Body Diodes on Paralleled SiC MOSFETs Application

A Double-Sided Cooling 6.5kv SiC MOSFET Power Module with Insulation Enhancement Design

Cu Clip-Bonding Method With Optimized Source Inductance for Current Balancing in Multichip SiC MOSFET Power Module

Cancellation of Power-Gate Mutual Inductance for Crosstalk Voltage Alleviation in SiC MOSFET Multi-chip Power Modules

Design, Packaging and Evaluation of an All-SiC-Based Four-Level ANPC Power Module

Over-Voltage and Oscillation Suppression Circuit with Switching Losses Optimization and Clamping Energy Feedback for SiC MOSFET

A Quasi-Two-Level Medium-Voltage SiC MOSFET Power Module with Low Loss and Voltage Self-Balance