Abstract:This work presents a scaling-friendly Discrete-Time (DT) 2nd order $\Delta \Sigma $ ADC using a passive lossy integrator and a novel VCO-Frequency Delta-Sigma Modulator (FDSM). The proposed ADC has a 1st order $\Delta \Sigma $ ADC structure with a 1st-order loop filter and a quantizer. The loop filter consists of a passive lossy integrator, which is OTA-free, energy-efficient, and provides a 1st order noise shaping. The proposed VCO-FDSM as a quantizer also realizes additional 1st order noise shaping. Therefore, the overall structure has 2nd order noise shaping property. The proposed VCO-FDSM employs a linear VCO with negative feedback to improve the linearity. The VCO output frequency is quantized into a multi-bit thermometer digital output code with inherent dynamic element matching (DEM) property by the fully digital FDSM. The FDSM output having DEM property mitigates the mismatch error of the capacitive digital-to-analog converter (CDAC). This highly digital architecture facilitates a trade-off between the supply voltage and the operational bandwidth (BW), which makes the ADC suitable for energy-efficient IoT applications. The test chip fabricated in 65nm standard CMOS technology operates at wide supply voltages ranging from 0.6 V to 1.2 V with a bandwidth range from 1.25 kHz to 5 kHz. The proposed ADC achieves a 75.7 dB peak SNR at 3.5 kHz BW, consuming 7.78 $\mu $ W with a Schreier FoMs of 164.7 dB at 1 V.

An 8b 0.8ks/S Configurable Vco-Based Adc Using Oxide Tfts With Inkjet Printing Interconnection

A 2.5 Khz 50.57 Db Linearized VCO ADC Using 6 Μm LTPS TFTs

A 10.23-Bit ENOB 1 Ks/s Differential VCO-Based ADC with Resistive Input Stage in Low-Temperature Poly-Silicon TFT Technology

An 8-B 300ms/s Folding and Interpolating Adc for Embedded Applications

A 0.04-Mm2 0.9-Mw 71-Db SNDR Distributed Modular AS ADC with VCO-based Integrator and Digital DAC Calibration

Flexible and fully integrated 4-bit SAR ADC Using Metal-Oxide TFTs

A 100mhz S/s, 7 Bit VCO-based ADC Which is Used in Time Interleaved ADC Architectures

A 0.6-to-1.2 V Scaling-Friendly Discrete-Time OTA-Free Linear VCO-Based TEXPRESERVE0 ADC Suitable for DVFS

An 8-Bit 1.5-Gs/s Voltage–Time Hybrid Two-Step ADC with Cross-Coupled Linearized VTC

A 66.67kHz 4.953 nJ/Conv-Step 5b Fully Integrated Asynchronous SAR ADC Using <tex>$\mathbf{4} \boldsymbol{\mu}\mathbf{m}$</tex> LTPS TFTs

An 8 Bit 12 MS/s Asynchronous Successive Approximation Register ADC with an On-Chip Reference

A Low Power 14 Bit 51.2 Ks/S Double-Sampling Extended Counting Adc with A Class-Ab Ota

A Differential Ring Oscillator With Tail Current Source Control Scheme Using N-Type Oxide TFTs

A 4gs/s 8bit ADC Fabricated in 0.35&#x00b5;m SiGe BiCMOS Technology

An Integrator and Schmitt Trigger Based Voltage-to-Frequency Converter Using Unipolar Metal-Oxide Thin Film Transistors

A 42fj 8-Bit 1.0-Gs/s Folding and Interpolating ADC with 1ghz Signal Bandwidth

A Synthesizable 0.0060mm2 VCO-Based Delta Sigma Modulator with Digital Tri-level Feedback Scheme.

A VCO Based Continuous Time Delta Sigma ADC with 10mhz BW 55db SNR and 42db SNDR

A Low Power Double-Sampling Extended Counting Adc with Class-Ab Ota for Sensor Arrays

An 81.5Db-Dr 1.25Mhz-Bw VCO-Based CT ΔΣ ADC with Double-PFD Quantizer

A 0.025mm(2) 0.8v 78.5db-Sndr Vco-Based Sensor Readout Circuit In A Hybrid Pll-Delta Sigma M Structure