Abstract:A differential ring voltage‐controlled oscillator (DRVCO) is proposed as a critical block in communication systems, employing Wu active inductors for the first time to achieve low noise, wide tuning range, and low power consumption. Designed in 180 nm CMOS technology, it operates at 2.745 GHz with a tuning range of 2.15 GHz, consuming 1.99 mW. The phase noise is −91.2 dBc/Hz at 1 MHz offset, with a FoM of −156.9 dBc/Hz, covering 0.00072 mm2. A differential ring voltage‐controlled oscillator (DRVCO) is proposed in this paper as one of the critical blocks in communication systems. It consists of four stages of delay cells connected in a chain, creating a ring structure with auxiliary path interconnections. The oscillation frequency of the DRVCO can be controlled by adjusting the tuning voltage that controls the charging current. To achieve the desired performance for wireless applications, the Wu active inductor, which is a low‐noise and high‐quality factor active inductor, is employed in each delay cell for the first time. Using an active inductor provides a wide tuning range and also allows for proper phase noise and low power consumption. The proposed circuit is designed and simulated using standard 180‐nm CMOS technology with a 1.8‐V voltage source (VDD). The circuit is designed to achieve a tuning range of 2.15 GHz with a center frequency oscillation of 2.745 GHz, over the control voltage variation of 1.4 V (0 to 1.4 V). To achieve the desired performance, the circuit consumes an average power of 1.99 mW. It achieves a phase noise of − 91.2 dBc/Hz at 1 MHz offset frequency, indicating effective noise suppression. The figure of merit (FoM) for the circuit is − 156.9 dBc/Hz, representing its overall performance. The final layout of the circuit estimates an area of 0.00072 mm2. Various analyses, including Monte–Carlo simulations, PVT (process, voltage, temperature) variation analysis, and other relevant analyses, have been performed to ensure the reliable performance of the proposed circuit.

A Differential Ring Oscillator With Tail Current Source Control Scheme Using N-Type Oxide TFTs

A Low- Power CMOS Ring- Based Oscillator Using Current Steering Logic Structure

A Two-stage VCO With Extra Wide Tuning Range

Differential VCO design with a wide frequency tuning range

A 1.6–10.9 GHz voltage-controlled ring oscillator for the serial interface of high-speed data converters

An 8-11Ghz Low Phase Noise Ring Voltage Controlled Oscillator

A Complementary Oscillator Using a Current-Limiting Tail Resistor in 180nm CMOS

A 12.3–18.5-Ghz Single-Core Oscillator Using a Dual-Mode Variable Inductor with a Tunable Self-Resonant Frequency Technique

A Novel Dual-Band Six-Phase Voltage-Control Oscillator

A 1.0 V Differential VCO in 0.13 Μm CMOS Technology

A Full Swing and Low Power Voltage-Controlled Ring Oscillator

A wide tuning 10 Ghz VCO and a high frequency divider design

A Voltage-Controlled Ring Oscillator With VCO-Gain Variation Compensation

CMOS Voltage-Controlled Oscillator with Complementary and Adaptive Overdrive Voltage Control Structures

A 12-GHz Transformer Feedback Class-F2,3 Voltage-Controlled Oscillator Using Noise Circulating With FoM of 190.5 dBc/Hz

40 GHz VCO and Frequency Divider in 28 nm FD-SOI CMOS Technology for Automotive Radar Sensors

A 57&#x223c;66ghz CMOS Voltage-Controlled Oscillator Using Tunable Differential Inductor

A wide tuning range CMOS differential ring VCO using an active inductor for wireless applications

A broadband CMOS LC voltage-controlled oscillator for FMCW synthesizer

An Enhanced Class-F Dual-Core VCO With Common-Mode-Noise Self-Cancellation and Isolation Technique

The Design of a 2.82～4.04 GHz CMOS Differential Tuned LC VCO