Abstract:High-resolution ($>$ 100dB SNDR), kHz-BW ADCs are required by emerging Io $\top$ and smart sensing applications. These ADCs are desired for their high efficiency, but low cost and ease of integration are also required, especially to be compatible with the advanced CMOS processes that the loT processor prefers. The state-of-the-art solutions in this scenario, such as the zoom ADC [1], the DT or CT-DSM [2]–[3], and the SAR ADC [4] and its noise-shaping variants [5], have already achieved great energy efficiency with >180dB FOMs. However, most of them are large in area, and rely heavily on the analog performance of old CMOS technologies with high supply voltages. In this work, we propose a new architecture that combines the counting ADC and CT-incremental-DSM (CT-IDSM) in a zoom ADC framework. The proposed architecture is not only power efficient, but also compact in area, highly digital, and friendly to process down-scaling. It operates at Nyquist sampling, supporting single-shot conversion and channel multiplexing. Besides this, it provides a high-impedance input with full-scale common-mode rejection, allowing direct driving by many signal sources. Fabricated in 28nm CMOS, the prototype zoom-incremental-counting (ZIC) ADC is measured to have 103dB SNDR at 20kSa/s, consuming 475 $\mu$ W from a 0.9V supply. The resulting 176dB FOMs is comparable to the state-of-the-art designs. It occupies only 0.014mm2, which is a magnitude or two smaller than most reported ADCs with $>$ 90dB SNR.

A Low Power Double-Sampling Extended Counting Adc with Class-Ab Ota for Sensor Arrays

An ultra-low-power extended counting ADC For large scale sensor arrays

A 10-Bit 250-KS/s 1.24-uW SAR ADC for IoT Sensors with Energy-Efficient Comparator.

Low power design for 14-bit 100MSPS pipelined ADC

A Low Power 14 Bit 51.2 Ks/S Double-Sampling Extended Counting Adc with A Class-Ab Ota

Design of a Low Power Extended Counting ADC

A 13-Bit, Low-Power, Compact Adc Suitable for Sensor Applications

A 10-Bit 100-Msps Low Power Time-Interleaved ADC Using OTA Sharing

A Low-Power 14-Bit Hybrid Incremental Sigma-Delta/cyclic ADC for X-ray Sensor Array

A Low-Power 14-Bit Two-Stage Hybrid Adc for Infrared Focal Plane Array Detector

A 1.2 V 600 Nw 12-Bit 2 Ks/s Incremental ADC for Biosensor Application

A 0.014mm2 10Khz-Bw Zoom-Incremental-Counting ADC Achieving 103db SNDR and 100db Full-Scale CMRR

A 1.8-V 14-Bit Inverter-Based Incremental Sigma Delta Adc For Cmos Image Sensor

A 0.029-mm2 17-fJ/Conversion-Step Third-Order CT ADC With a Single OTA and Second-Order Noise-Shaping SAR Quantizer

A Low Power Cyclic ADC Design for a Wireless Monitoring System for Orthopedic Implants

A Time-to-Digital Converter for Low-Power Consumption Single Slope Analog-to-Digital Converters in a High-Speed CMOS Image Sensor

A 0.029-Mm2 17-Fj/conversion-step Third-Order CT $\delta\sigma$ ADC with a Single OTA and Second-Order Noise-Shaping SAR Quantizer

A Low Power 10-Bit 100-Ms/s SAR ADC in 65nm CMOS

A Low-Power Time-Domain VCO-based ADC in 65 Nm CMOS

A 10-Bit 16-Ms/s Ultra Low Power SAR ADC for IoT Applications

A Low Power 12-Bit 20msamples/s Pipelined Adc