Abstract:Cu3SbSe4, featuring its earth-abundant, cheap, nontoxic and environmentally friendly constituent elements, can be considered as a promising intermediate temperature thermoelectric (TE) material. Herein, a series of p-type Bi-doped Cu3Sb1−xBixSe4 (x = 0–0.04) samples were fabricated through melting and hot pressing process, and the effects of isovalent Bi-doping on their TE properties were comparatively investigated by experimental and computational methods. TEM analysis indicates that Bi-doped samples consist of Cu3SbSe4 and Cu2−xSe impurity phases, which is in good agreement with the results of XRD, SEM and XPS. For Bi-doped samples, the reduced electrical resistivity (ρ) caused by the optimized carrier concentrations and enhanced Seebeck coefficient derived from the densities of states near the Fermi level give rise to a high power factor of ~ 1000 µWm−1 K−2 at 673 K for the Cu3Sb0.985Bi0.015Se4 sample. Additionally, the multiscale defects of Cu3SbSe4-based materials involving point defects, nanoprecipitates, amorphous phases and grain boundaries can strongly scatter phonons to depress lattice thermal conductivity (κlat), resulting in a low κlat of ~ 0.53 Wm−1 K−1 and thermal conductivity (κtot) of ~ 0.62 Wm−1 K−1 at 673 K for the Cu3Sb0.98Bi0.02Se4 sample. As a consequence, a maximum ZT value ~ 0.95 at 673 K is obtained for the Cu3Sb0.985Bi0.015Se4 sample, which is ~ 1.9 times higher than that of pristine Cu3SbSe4. This work shows that isovalent heavy element doping is an effective strategy to optimize thermoelectric properties of copper-based chalcogenides.

Enhanced Thermoelectric Property in Superionic Conductor Bi-doped Cu1.8S

Light Element Doping and Introducing Spin Entropy: an Effective Strategy for Enhancement of Thermoelectric Properties in BiCuSeO.

Enhanced Thermoelectric Performance of Bi–Se Co-Doped Cu1.8S Via Carrier Concentration Regulation and Multiscale Phonon Scattering

Enhanced Thermoelectric Performance of Bi–Se Co-Doped Cu 1.8 S via Carrier Concentration Regulation and Multiscale Phonon Scattering

Highly Enhanced Thermoelectric and Mechanical Properties of Bi-Sb-Te Compounds by Carrier Modulation and Microstructure Adjustment

Enhanced thermoelectric performance of Bi<sub>2-x</sub>Cu<sub>x</sub>S<sub>3</sub> by hydrothermal synthesis and spark plasma sintering

Enhanced thermoelectric performance of BiCuSO by Pb doping and Se alloying

Enhanced Thermoelectric Properties of Cu3SbSe4 Compounds by Isovalent Bismuth Doping

Synergistically enhanced thermoelectric properties of Bi2S3 bulk materials via Cu interstitial doping and BiCl3 alloying

Roles of Cu in the Enhanced Thermoelectric Properties in Bi0.5Sb1.5Te3

Enhanced thermoelectric performance of Bi2-xCuxS3 by hydrothermal synthesis and spark plasma sintering

Structural features and thermoelectric performance of Sb- and Bi-doped Cu2SnSe3 compounds

High thermoelectric performance in n-type bismuth sulfide by carrier concentration tuning and dense nanodomains

Superior thermoelectric performance in non-stoichiometric Cu 3 SbSe 4 system: towards synergistic optimization of carrier and phonon transport

Enhancing the Thermoelectric Performance of Cu1.8S by Sb/Sn Co-Doping and Incorporating Multiscale Defects to Scatter Heat-Carrying Phonons

Unlocking the Potential of Cu3SbSe3: Ultralow Thermal Conductivity and Enhanced Thermoelectric Performance

Enhancement of the thermoelectric properties of MnSb2Se4 through Cu resonant doping

Band convergence and thermoelectric performance enhancement of InSb via Bi doping

Tuning Ag content to achieve high thermoelectric properties of Bi-doped p-type Cu3SbSe4-based materials

Rectalepidural fistula complicating Crohn's enterocolitis

Enhanced Thermoelectric Performance in Polymorphic Heavily Co-doped Cu2SnS3 Through Carrier Compensation by Sb Substitution