Abstract:In this study, we proposed a high-throughput separation strategy of the binary colloid mixture by dielectrophoresis (DEP) induced around large-scale bipolar electrode arrays embedded in microfabricated fluidic networks via a thorough numerical investigation. The usage of a floating electrode (FE) eliminates the need of external Ohmic connection to individual array units, therefore potentially steering the faddish design of new microdevice structures. Diffuse charge dynamics within the induced double layer at opposite ends of every FE permit a sinusoidal electric field to penetrate throughout the whole device, as long as the imposed field frequency is beyond the reciprocal resistor-capacitor time constant at the electrode/electrolyte interface. In this special device configuration, FEs interconnect multiple microchannels arranged in parallel. Pockets embedded on the sidewalls of fluidic channels help create strong field gradients at the tip of FEs and sharp pocket/channel junctions, improving the trapping performance of incoming bioparticles subjected to positive-DEP (pDEP) force, while latex beads experiencing negative-DEP (nDEP) stress are electrically squeezed to the midchannel and finally exit as a series of co-flowing thin streams with unequal translatory velocity. Taking the synergy of DEP force, induced-charge electro-osmosis, alternating-current electrothermal streaming, pressure-driven flow, and buoyancy effect into consideration, a numerical model is established to account for motion trajectories of micro-entities in full-scale three-dimensional space using the Lagrange particle track algorithm, as well as testing the feasibility of the device design in separation of the binary mixture containing yeast cells and polystyrene beads. Applying suitable voltage parameters of frequency O(1) MHz and electric field strength O(10) V/mm, highly efficient DEP separation is theoretically achievable under inlet flow velocity on the order of O(1) mm/s, where most of incoming yeasts are captured by pDEP within these five parallel branching channels, while polystyrene spheres are repelled by nDEP away from the FE array to form slim beams co-flowing into the outlet according to the calculation results. The microfluidic separation device exploiting the FE array offers great potential to build up scalable electrokinetic platforms for high-throughput on-chip sample treatment.

Comparative Study of Cylindrical and Parallel-Plate Electrophoretic Separations for the Removal of Ions and Sub-23 Nm Particles.

Continuous Particle Separation Driven by 3D Ag-PDMS Electrodes with Dielectric Electrophoretic Force Coupled with Inertia Force

High-Resolution Charge-Based Electrokinetic Separation of Almost Identical Microparticles

Continuous Submicron Particle Separation Via Vortex-Enhanced Ionic Concentration Polarization: A Numerical Investigation

SEPARATION EFFICIENCY OF MICROPARTICLE IN THE DIVERGENT ELECTROKINETIC MICROCHANNEL FLOW

Elimination of suction effect in interfacing microchip electrophoresis with inductively coupled plasma mass spectrometry using porous monolithic plugs.

Continuous Dielectrophoretic Particle Separation Using A Microfluidic Device with 3d Electrodes and Vaulted Obstacles

Numerical Simulations of Combined Dielectrophoresis and Alternating Current Electrothermal Flow for High-Efficient Separation of (Bio)Microparticles

Joule Heating Effects on Separation Efficiency in Capillary Zone Electrophoresis with an Initial Voltage Ramp.

Induced Charge Electro-Osmotic Particle Separation

A numerical study on microfluidic devices to maintain the concentration and purity of dielectrophoresis-induced separated fractions of analyte

Continuous separation of microparticles based on optically induced dielectrophoresis

Theoretical Study of the Separation Mechanism of Ionizable Compounds in Capillary Electrochromatography

Ion Extraction and Collection Studied by Parallel Electrode Method on Considering Sputtering Loss

A Complete Design Flow of Dielectrophoretic Chip

Simulating the trajectory of conductive particles in positive high-voltage electrostatic separators and optimizing parameters

Dielectrophoretic microfluidic device for separation of red blood cells and platelets: a model-based study

Continuous Flow Separation of Red Blood Cells and Platelets in a Y-Microfluidic Channel Device with Saw-Tooth Profile Electrodes via Low Voltage Dielectrophoresis

Dielectrophoretic Separation with a Floating-Electrode Array Embedded in Microfabricated Fluidic Networks

A Simplified Microfluidic Device for Particle Separation with Two Consecutive Steps: Induced Charge Electro-osmotic Prefocusing and Dielectrophoretic Separation.

Modelling of bioparticle separation in the dielectrophoresis microfluidic using the Brinkman flow