Abstract:Wearable electronics are becoming more and more popular, and in order to ensure the safety and accuracy of wearable electronics, the requirements for the refinement and stability of flexible electrodes are getting higher and higher. The reduction of the amount of ink jet and the reduction of surface charge density and electrostatic stress near the nozzle hole can significantly improve the jetting state of the ink. And nozzle voltage is a key factor that affects them. The spreading of ink droplets on the substrate and the formation of a specific pattern is a dynamic process, which is closely related to the properties of the substrate and the state of the ink droplets. In this paper, PEN is used as the substrate to print silver electrode, with its good thermal stability and good mechanical properties. In order to solve these problems and improve the accuracy of the electrode pattern on PEN substrate, a joint control method of ink drop spacing and nozzle voltage is proposed. It is found that the accuracy of the pattern increases with the increase of the drop spacing. At 45 μm, 90.91 % of the pattern accuracy with the ideal pattern can be achieved. As the nozzle voltage decreases, so does the satellite spot. And at 25 V, it can achieve satellite-free spot printing. Because this method avoids the adjustment of ink properties and the regulation of voltage waveform, this advancement provides a simpler solution for patterned high-precision printed silver electrodes based on flexible substrates. In addition, a silver electrode with a resistivity of 3.43 μΩ·cm was obtained at an annealing temperature of 160 °C. The resistivity change of the electrode only 7.58 % under 5000 times of bending. This is very rare in flexible electrodes.The silver film on the PEN substrate exhibited excellent adhesion under the tape test. XPS depth profiling was used to characterize the elemental states of the films at different depths. The results indicated that the coordination bond between the PEN substrate and the Ag film resulted in good bending resistance, which gives a persuasive explanation for the first time. This result is also due to the precise handling of the film, which also results in a homogeneous distribution of the film. It solves the problem of poor adhesion of silver electrodes based on other substrates or other preparation methods. Therefore, silver electrodes based on PEN substrates have a broad application prospect in the field of flexible wearable electronics.

UV-Cured Inkjet-Printed Silver Gate Electrode with Low Electrical Resistivity

Study of Inkjet-Printed Silver Films Based on Nanoparticles and Metal-Organic Decomposition Inks with Different Curing Methods.

Low-temperature reducible particle-free screen-printable silver ink for the fabrication of high conductive electrodes

Low-temperature sintering of silver patterns on polyimide substrate printed with particle-free ink

Conductivity of Silver and Copper Film Printed by Particle-Free Reactive Inks

Advanced interconnect materials for ink-jet printing by low temperature sintering

Nano-Silver Ink of High Conductivity and Low Sintering Temperature for Paper Electronics

The self-induced electric-field-driven jet printing for fabricating ultrafine silver grid transparent electrode

Low-temperature silver-based ink for highly conductive paths through industrial printing processes suitable for thermally sensitive substrates and beyond

Cost-effective Silver Nano-Ink for Inkjet Printing in Application of Flexible Electronic Devices

A Strategy toward Realizing Narrow Line with High Electrical Conductivity by Electrohydrodynamic Printing

Preparation of low-temperature sintered high conductivity inks based on nanosilver self-assembled on surface of graphene

Preparation of Nano-Silver Conductive Ink and Electrode Properties

Reactive Silver Oxalate Ink Composition with Enhanced Curing Conditions for Flexible Substrates

High-precision silver electrode based on PEN substrate with robust mechanical performance

Silver frameworks based on self-sintering silver micro-flakes and its application in low temperature curing conductive pastes

Inkjet-Printed Silver Nanowire Ink for Flexible Transparent Conductive Film Applications

Preparation Of High-Performance Conductive Ink With Silver Nanoparticles And Nanoplates For Fabricating Conductive Films

Preparation of a Low Temperature Sintering Silver Nanoparticle Ink and Fabrication of Conductive Patterns on PET Substrate

Inkjet printing porous graphene/silver flexible electrode with enhanced electrochemical performance based on vapor phase reduction

Direct Writing Highly Conductive Silver Pattern on Flexible Substrate Based on Particle-Free and Ionic Liquid-Assisted Ink