Abstract:The number of malfunctioning satellites is dramatically increasing with the development of space technology in recent decades.These malfunctioning satellites are normally in rotating or tumbling states due to residual angular momentum, gravity gradient, et al, making direct capture impossible.Therefore, stabilizing these objects within acceptable angular velocities is an indispensable stage for in-orbit capture.The contact method using a flexible device (e.g., brush or rod) to detumble these satellites is considered to be safe and efficient enough.However, it is extremely time-consuming to solve the dynamic model of the detumbling system, which is a very tricky problem for in-orbit computation and real-time simulation.There are two main limitations: (i) The finiteelement-based dynamic model of the large-deformation device is high-dimensional.(ii) The contact-impact model depends on small time steps to correctly describe the contact-impact process.To address this problem, this paper proposes a data-driven model to simplify the dynamic model of the large-deformation device and the contactimpact model.The large-deflection cantilever beam under the follower force is utilized to describe the deformation of the flexible device in any moment of the contact process.Huge amounts of data, covering all deformations of the device during contact, can be got by solving a series of differential equations based on the Euler-Bernoulli beam theory.Then, the data is trained by the neural network method to obtain the data-driven model that maps the deformation of the flexible device and the contact forces acting on the device.Finally, the simplified model of the detumbling system is established by combining the data-driven model, the robot model, and the target satellite model.Simulation results verify that the data-driven model is reliable and the real-time simulation is feasible.

Space Robotic De-Tumbling of Large Target with Eddy Current Brake in Hand.

Detumbling an Uncontrolled Satellite with Contactless Force by Using an Eddy Current Brake.

Non-Cooperative Space Target De-Tumbling Approach Using Multiple High-Temperature Superconducting Coils

Dynamics and Control for Eddy Braking a Space Tumbling Target

Active Detumbling Technology for Noncooperative Space Target with Energy Dissipation

An Improved Uncooperative Space Target De-tumbling Method Using Electromagnetic De-tumbling Devices with AC Excitation

Dynamic Analysis of Detumbling a Rotating Satellite Using Flexible Deceleration Rod

Prospects of Using a Permanent Magnetic End Effector to Despin and Detumble an Uncooperative Target

Development of an eddy current brake system for detumbling malfunctioning satellites

Prospects of De-Tumbling Large Space Debris Using a Two-Satellite Electromagnetic Formation

Trajectory Planning and Coordination Control of a Space Robot for Detumbling a Flexible Tumbling Target in Post-Capture Phase

1P2-L01 Validation of a Detumbling Method with a Contactless Force by an Eddy Current Brake(Space Robotics)

An Application of Eddy Current Effect on the Active Detumble of Uncontrolled Satellite with Tilt Air Gap

Capture and Detumbling Control for Active Debris Removal by a Dual-Arm Space Robot

Triaxial Contact Detumbling of Large-scale Space Debris

Rotational Dynamics and Capture Strategy for Space Tumbling Targets

Prescribed Performance Sliding Mode Control for Safe De-Tumbling a Rolling Target by Eddy Current

A Data-Driven Model for Real-Time Simulation of the Contact Detumbling of Satellites

aaContactless de-tumbling of the uncooperative targets using arc-linear electromagnetic device

Detumbling a Flexible Tumbling Target Using a Space Robot in Post-capture Phase

Conceptual Design Of An Electromagnetic Detumbling System Made By Permanent Magnet Array