Abstract:The exponential rise in small-satellites and CubeSats in Low Earth Orbit (LEO) poses important challenges for future space traffic management. At altitudes of 600 km and lower, aerodynamic drag accelerates de-orbiting of satellites. However, placement of satellites at higher altitudes required for constellations pose important challenges. The satellites will require on-board propulsion to lower their orbits to 600 km and let aerodynamic drag take-over. In this work we analyze solutions for de-orbiting satellites at altitudes of up to 3000 km. We consider a modular robotic de-orbit device that has stowed volume of a regular CubeSat. The de-orbit device would be externally directed towards a dead satellite or placed on one by an external satellite servicing system. Our solutions are intended to be simple, high-reliability devices that operate in a passive manner, requiring no active electronics or utilize external beamed power in the form of radio frequency, microwave or laser to operate. Utilizing this approach, it is possible for an external, even ground based system to direct the de-orbit of a spacecraft. The role of an external system to direct the de-orbit is important to avoid accidental collisions. Some form of propulsion is needed to lower the orbit of the dead satellite or orbital debris. We considered green (non-toxic) propulsion methods including solar radiation pressure, solar-thermal propulsion using water steam, solar-electrolysis propulsion using water and use of electrodynamic tethers. Based on this trade-study we identify multiple solutions that can be used to de-orbit a spacecraft or orbital debris.

Prospects of De-Tumbling Large Space Debris Using a Two-Satellite Electromagnetic Formation

Orbit-attitude coupled dynamics modeling and adaptive sliding mode control for detumbling large space debris

An Improved Uncooperative Space Target De-tumbling Method Using Electromagnetic De-tumbling Devices with AC Excitation

Triaxial Contact Detumbling of Large-scale Space Debris

Dynamics and Control for Contactless Interaction Between Spacecraft and Tumbling Debris

Space Debris Reliable Capturing by a Dual-Arm Orbital Robot: Detumbling and Caging

CubeSats Detumbling Using Only Embedded Asymmetric Magnetorquers

Impedance Control For Stabilizing The Coupled System During Tumbling Target Capturing

PCB-integrated embedded planar magnetorquers for small satellites intelligent detumbling

A collision control strategy for detumbling a non-cooperative spacecraft by a robotic arm

Detumbling of Underactuated Tethered Satellite System Based on Hierarchical Sliding Mode Control

Adaptive optimal concurrent control for detumbling space non-cooperative target via multipoint repeated contact

Capture Dynamics and Control of a Flexible Net for Space Debris Removal

A Trajectory Planning Method For Rapid Capturing An Unknown Space Tumbling Target

Guidance and Control for Safe Contactless Plume Impingement Operations to Detumble an Uncooperative Spacecraft

Area-oriented Coordinated Trajectory Planning of Dual-Arm Space Robot for Capturing a Tumbling Target

Dynamic Parameter Estimation of Large Space Debris Based on Inertial and Visual Data Fusion

Dynamic modeling and control strategy for tethered satellite systems in orbital debris management

Single- and Multinozzle Plume Impingement to Detumble Space Debris

Modeling and Planning of a Space Robot for Capturing Tumbling Target by Approaching the Dynamic Closest Point

Advanced Inflatable De-Orbit Solutions for Derelict Satellites and Orbital Debris