Abstract:An electromagnetic coil topology and its control strategy, which can be incorporated into the electromagnetic docking device, have been proposed for the relative roll control of two satellites in space. The target satellite and the chaser satellite are respectively embarked with four and six coils evenly arranged around the docking axis. All the coils on the target satellite are Direct Current (DC) energized, while the currents in the coils of the chaser satellite are regulated to achieve the relative roll control. The electromagnetic force/torque model is built by utilizing the frequentlyused far field model. Based on the fundamental components extracted from that model, this paper proposes a real-time magnetic moment vector distribution formula that simply generates a constant roll torque. This paper not only presents an equation for calculating the relative roll angle through the Euler angles of two satellites, but also an equation that converts the roll torque setpoint to the setpoints of the coil currents. A 3-closed-loop positioning controller composed of angle, angular velocity, and current loop is developed. The proposed topology is verified by finite element simulation, and the control strategy is validated by dynamics simulation and ground-based tests.(c) 2023 Production and hosting by Elsevier Ltd. on behalf of Chinese Society of Aeronautics and Astronautics. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/ licenses/by-nc-nd/4.0/).

Non-Cooperative Space Target De-Tumbling Approach Using Multiple High-Temperature Superconducting Coils

A Solution Using Only Electromagnetic Coils for Relative Pose Control in Satellite Docking

Relative roll control of satellite docking using electromagnetic coils

Sun-pointing Safe Control for Atmospheric Environment Monitoring Satellite Using Magnetic Actuation

Optimal Configuration of Distributed HTS Coils for the Non-Contact De-Tumbling of Space Debris

Satellite Attitude Control for Emergency Mode Using Reaction Wheels and Magnetic Torquers

Prospects of De-Tumbling Large Space Debris Using a Two-Satellite Electromagnetic Formation

Prospects of Using a Permanent Magnetic End Effector to Despin and Detumble an Uncooperative Target

CubeSats Detumbling Using Only Embedded Asymmetric Magnetorquers

Non-Propellant Eddy Current Brake and Traction in Space Using Magnetic Pulses

Research on non-propellant electromagnetic controll based on Eddy Current Brake under non-uniform magnetic field

Active Detumbling Technology for High Dynamic Non-Cooperative Space Targets

Integrated Position and Attitude Adaptive Stabilization of Service Spacecraft for the Detumbling of Space Debris via Eddy Brake

Detumbling a Non-Cooperative Tumbling Target Using a Low-Thrust Device

Integrated Position and Attitude Stabilization of Spacecraft for Eddy Brake Based Detumbling

PCB-integrated embedded planar magnetorquers for small satellites intelligent detumbling

An Improved Uncooperative Space Target De-tumbling Method Using Electromagnetic De-tumbling Devices with AC Excitation

Attitude Recovery Scheme of Magnetically Controlled Satellite with Constant Thrust

Active Detumbling Technology for Noncooperative Space Target with Energy Dissipation

Orbit-attitude coupled dynamics modeling and adaptive sliding mode control for detumbling large space debris

Building a Better B-Dot: Fast Detumbling with Non-Monotonic Lyapunov Functions