Abstract:Using a space robot to capture a non-cooperative spacecraft with high-speed rotation is significantly challenging since any collision generated during capturing will have great impact on both. To reduce the risk in capturing operations, it is crucial to slow down the rotation velocity of the target before capturing. Hence, this paper studies a collision control strategy for using a robotic arm to detumble a non-cooperative spacecraft. The goal of this strategy is to maintain contact between the robot and the target and to apply continuous detumbling force on the target to slow down its rotational motion. To achieve that, first the mechanism analysis of the two balls for a central collision scenario is performed. Then an overdamping control method is proposed to avoid the separation of the balls after the central collision based on the overdamping property of the mass-spring-damper system, the effectiveness of which is validated theoretically. Finally, to use this overdamping control method in the detumbling missions of space robots, a position-based overdamping control strategy is introduced. In this strategy, the relative dynamic behavior between the robotic arm tip and the contact surface of the target during detumbling is approximated to that of a mass-spring-damper system. Owing to the proposed overdamping control method, the contact between the robot and the target can be maintained, and the space robot can apply continuous control torque to slow down the rotational velocity of the target. Numerical simulations are performed to demonstrate the validity of the proposed control strategy.

1P2-L01 Validation of a Detumbling Method with a Contactless Force by an Eddy Current Brake(Space Robotics)

An Improved Uncooperative Space Target De-tumbling Method Using Electromagnetic De-tumbling Devices with AC Excitation

Research on non-propellant electromagnetic controll based on Eddy Current Brake under non-uniform magnetic field

CubeSats Detumbling Using Only Embedded Asymmetric Magnetorquers

Satellite Attitude Control for Emergency Mode Using Reaction Wheels and Magnetic Torquers

Space Debris Reliable Capturing by a Dual-Arm Orbital Robot: Detumbling and Caging

A collision control strategy for detumbling a non-cooperative spacecraft by a robotic arm

Dynamics and Control for Contactless Interaction Between Spacecraft and Tumbling Debris

Triaxial Contact Detumbling of Large-scale Space Debris

Adaptive optimal concurrent control for detumbling space non-cooperative target via multipoint repeated contact

Orbit-attitude coupled dynamics modeling and adaptive sliding mode control for detumbling large space debris

Adaptive detumbling control of dual-arm space robot after capturing non-cooperative target

Development of 6DOF Hardware-in-the-Loop Ground Testbed for Autonomous Robotic Space Debris Removal

Adaptive Robot Detumbling of a Non-Rigid Satellite

PCB-integrated embedded planar magnetorquers for small satellites intelligent detumbling

Modeling and Planning of a Space Robot for Capturing Tumbling Target by Approaching the Dynamic Closest Point

A Compliant Control Method and Its Ground Verification Experiment of A Space Robot

Model Predictive Approach for Detumbling an Underactuated Satellite

Impedance Control For Stabilizing The Coupled System During Tumbling Target Capturing

Laboratory Study of Microsatellite Control Algorithms Performance for Active Space Debris Removal Using UAV Mock-Ups on a Planar Air-Bearing Test Bed

Guidance and Control for Safe Contactless Plume Impingement Operations to Detumble an Uncooperative Spacecraft