Abstract:Computer-Aided Design (CAD) tools are extensively used throughout all of the steps in a VLSI design flow. The physical design domain is one of the three domains that are conceptually abstracted in representing a VLSI design flow. This research work focuses on three areas in VLSI physical design domain: clock tree design and buffer insertion, interconnect model order reduction and LVS verification. First, an optimal buffer insertion for clock delay and skew minimization algorithm is developed based on the theory that the minimal clock delay can be obtained by equalizing derivatives of a convex function, and the minimal clock skew can be achieved by equalizing delay functions of different source-to-sink paths. Experimental results show that the presented algorithm achieves both minimal delay and skew in real clock tree design. Further, an automatic clock tree design algorithm is developed for realizing the pre-specified clock arrival time requirements that often occur in an IP block based design environment. In this proposed strategy, planar clock routing and buffer insertion are carried out simultaneously to minimize clock delay and skew, and a full waveform simulation is applied to ensure the signal integrity necessary for high-speed VLSI design. Second, an efficient balanced truncation realization algorithm is presented for interconnect model order reduction. This algorithm shows that there is no need to solve the whole Lyapunov equation for controllability and observability grammians before obtaining approximation to their predominant spaces, and a linear order reduction algorithm can be achieved by extending the O(n) Krylov Subspace Oblique Projection method. Finally, a unique LVS methodology is proposed for the verification of a quad-core microprocessor designed with a triple-well 90-nm CMOS technology. Due to the IP reuse, the standard LVS flow is incapable of handling the additional design complexity in verifying the LVS for the chip designed with multiple power domains. This proposed LVS strategy consists of two phases. The first phase involves verifying LVS at the block level as well as the full-chip level. The second phase aims at verifying the integrity of the multi-power-domain power grid. The proposed LVS methodology was successfully verified by real silicon.

Automated Diagnosis Of Hv/Lv And Floating Gate Faults In Vlsi Design

Automated Diagnosis of HV/LV Connection and Floating Gate Faults in VLSIs

Accelerating RTL Quality Assessment Method Based on CAD Tools

Intelligent Fault Diagnosis of Large Vacuum System

VLSI Design Automation Procedure to Optimize SSN Performance

System Level Test Generation And Fault Simulation For Vlsi Circuits

Pg2000: A Cad Tool for Power/Ground Network Design, Optimization and Verification Based on Standard Cell Vlsis

Integrated tool for power/ground network design, optimization and verification for cell based VLSIs

High-Level Testing of Digital VLSI Circuits and Its Developing Trend

A scan chain optimization method for diagnosis

Fault Diagnosis for VSC-HVDC Using Wavelet Transform

Algorithms and Methodology in Physical Domain Optimization for High-Performance Vlsi Design

A layout transformation method for the high-precision parasitic extraction and timing analysis of VLSI interconnects

Testing and Diagnosis for Both Interconnect Resources and CLBs in Virtex Series FPGAs

Interconnect Resources Multiple Faults Testing and Diagnosis in Field Programmable Gate Arrays

A fault detection and location algorithm for the LVDC interconnection network in rural area

An Automated Technique for Circuit-Level Simulation-Based Soft Fault Injection

Fault Propagation Characteristics Analysis for Large-Scale Electronic System by Hierarchical Signed Directed Graph

On High-Speed VLSI Interconnects: Analysis and Design

A Hardware Trojan Diagnosis Method for Gate-Level Netlists Based on Graph Theory

Graph-based Fault Diagnosis Method for Complex Electronic Systems