Abstract:Tilt angle measurement in dynamic systems is problematic because the rotation of the measured platform is coupled with translation. Therefore, when some sensors are applied in dynamic systems, their output signals are often submerged in the noise signals generated by translation. To enhance the ability of tilt sensors to resist translational noise, a dynamic tilt sensor is proposed based on the principle of variable reluctance from the perspective of sensor structure. The eccentric structure of the sensor constructed with a shell, liquid, and internal damping plate was designed according to the principles of mechanics. The characteristic of translational acceleration restraint determined by the sensor structure was established theoretically. In addition, the magnetic circuit of the sensor was analyzed to illustrate the sensor’s working principles. A Clapp oscillator circuit was designed to convert mechanical motion into a measureable electrical signal. A method to determine the sensor’s direction of rotation is proposed. A waveform conversion circuit was designed to convert the sine wave output of the Clapp oscillator to a square wave, and a square-wave frequency measurement circuit was designed based on the C8051 micro-control unit. A translation–rotation experimental hardware platform was constructed. The data acquisition program was designed on a PC platform, and the translation–rotation experiments were conducted with an MTi attitude measurement unit as a reference. The validity of the tilt angle measurements and the effect of the translational acceleration restraint of the sensor were verified by the experimental data. The theoretical results obtained were consistent with the experimental data, verifying the validity of the theoretical analysis and experimental devices employed. A measurement range of −180 to 180° was achieved.

Accurate Tilt Sensing with Single Linear Model

A Three-dimension High-Precision and Non-contact Dynamic Angular Displacement Measurement System based on Heterodyne Interference

A Systemic Model for Simultaneously Measuring Three dimensional Rotation Angles of the Linear Guide Track [J]

A Liquid-Surface-Based Three-Axis Inclination Sensor for Measurement of Stage Tilt Motions

Optical Tilt Sensor with Direct Intensity-Modulated Scheme

A Novel Single-Axis MEMS Tilt Sensor with a High Sensitivity in the Measurement Range from 0∘ to 360∘

Sensor fusion for structural tilt estimation using an acceleration-based tilt sensor and a gyroscope

Design and Implementation of a Novel Tilt Sensor Based on the Principle of Variable Reluctance

Precise Two-Dimensional Tilt Measurement Sensor with Double-Cylindrical Mirror Structure and Modified Mean-Shift Algorithm for a Confocal Microscopy System

Research for an intelligent double-axis tilt sensor

Tilt Sensor with Recalibration Feature Based on MEMS Accelerometer

A Novel Method of Measuring Spatial Rotation Angle Using Mems Tilt Sensors

Precision tilting platform used for static calibration of accelerometers

On-Machine Measurement of the Straightness and Tilt Errors of a Linear Slideway Using a New Four-Sensor Method

A Novel Method and System Implementation for Precise Estimation of Single-Axis Rotational Angles

Mathematical Modeling on Linear Orientation Tolerance

Duplex Mode Tilt Measurements Based on a MEMS Biaxial Resonant Accelerometer

A Biaxial Resonant Tilt Sensor with Two-Stage Microleverage Mechanisms

A measuring system for well logging attitude and a method of sensor calibration

On-site accuracy evaluation of laser tracking attitude measurement system