Abstract:Systematic error in the point diffraction interferometer can significantly influence the measurement accuracy in the case that a high-numerical-aperture spherical surface is tested, in which wavefront aberrations could be observed and cannot be removed with the traditional calibration method. A calibration method, called symmetrical position aberration cancellation (SPAC) method, is proposed to remove the systematic error. With the SPAC method, the calibration needs two separate measurements with interferograms of opposite tilts and the systematic error can be reduced by averaging the test wavefronts of these two measurements. A geometrical optics model is presented for facilitating the calculation of the geometric aberrations that are introduced by the lateral deviation between the curvature center of the test surface and the center of the pinhole. Then a simulation model is built to analyze the influence of the lateral deviation and the numerical aperture of the surface under test on the systematic error. Both the computer simulation and experiments with a point diffraction interferometer (PDI) have been carried out to validate the proposed calibration method. In the final comparative experiment with a ZYGO interferometer, the PDI exhibits high precision in high-numerical-aperture spherical surfaces measurement based on the proposed calibration method. (C) 2015 Optical Society of America

Position Error Correction Of Large-Aperture Aspherical In-Position Measurement

Error Analysis Of Spherical Ultra-Precision Measurement

Aberration Calibration in High-Na Spherical Surfaces Measurement on Point Diffraction Interferometry

Calibration for the Errors Resulted from Aberration in Long Focal Length Measurement

Reduction of machining motion error of an aspheric surface coordinate measuring machine by a new error compensation method

Pose and position calibration of laser displacement sensor in aspheric measurement

Practical and Accurate Method for Aspheric Misalignment Aberrations Calibration in Non-Null Interferometric Testing

Verification and in Situ Calibration of Large-Aperture Null Correctors for Convex Aspheric Mirrors

Geometric Analysis of Measurement Errors in a Surface Metrology Class with Closed-Loop Probes

Error Separation and Correction Technology of Precision Measuring System in Aspheric Fine Grinding Phase

Air Flow Turbulence Orthogonality and Surface Error Estimation in Large Aperture Optical Testing

Model analysis of sub-aperture stitching interferometry for aspheric surface test

Position Error Correction in Absolute Surface Measurement Based on A Multi-Angle Averaging Method

Testing of Large-Aperture Aspheric Mirrors Using a Single Coated Lens.

Mapping Error Correction of Large Off-Axis Aspheric Surface in Null Test

Simulation of Convex Aspherical Surface Testing with Partial Compensating Interferometer

Calibrating System Errors of Large Scale Three-Dimensional Profile Measurement Instruments by Subaperture Stitching Method

Lateral Location Error Compensation Algorithm for Measuring Aspheric Surfaces by Sub-Aperture Stitching Interferometry

Error-separation Model for Interferometric Testing Aspheric Surfaces Based on Wavefront Aberrations

Study on Large-scale Space Angle Measurement Errors Based on Common Optical Reference

Stitching arithmetic of the sub-aperture testing of large convex aspheric surface