Abstract:The aspheric test via finite distance null compensation is limited by too many adjustment factors and low test precision. Here we establish an aspheric test system by integrating front null compensation with back null compensation, in which a compensation lens is used before and after the spherical center of the mirror to be tested and thus the front and back areas show aberration correlation. First, based on the aberration theory, the optical parameters of two compensation lenses arc theoretically derived and solved, and the relationship between the initial parameters and the normalized data is analyzed. Then the normalized results arc scaled and optimized by the optical design software. Four concave parabolic mirrors with different curvature radii arc designed under different magnifications of front null compensation lenses. The maximum aperture and the maximum relative aperture of the aspheric mirror arc obtained. The compensation lens with a 1/10 aperture ratio is used to realize the aspheric test of an aspheric mirror with a large aperture of 3.7 m and a large relative aperture of 1/1.2, and the peak-valley (PV) value of the residual wavefront error is superior to 0.1 lambda (lambda=633 nn). The tolerance analysis confirms that the test system is feasible. The principle experiment is conducted for the parabolic mirror with an aperture of 500 mm and a relative aperture of 1/1. The maximum diameter of the aspheric mirror and the difficulty of implementation arc compared between the proposed method and the classical configuration. The PV value and the RMS value of the designed wavefront error of the test system combining front and back null compensation is 0.061 lambda and 0.009 lambda, respectively. The RMS value is superior to lambda/10. The test system combining front and back null compensation is suitable for the high-precision test of aspheric surfaces with I m large diameter and large relative aperture.

Verification and in Situ Calibration of Large-Aperture Null Correctors for Convex Aspheric Mirrors

Study on testing larger asphericity in non-null interferometer - art. no. 68340T

Retrace Error Correction for Non-Null Testing of Optical Aspheric Surface

Non-null interferometric aspheric testing with partial null lens and reverse optimization

Aberration Calibration in High-Na Spherical Surfaces Measurement on Point Diffraction Interferometry

Research of precision interference locating method for a partial null compensator at aspheric testing

The Wavefront Aberration Analysis and Testing Accuracy Evaluation for the Large Aberration Aspheric System Based on the Best Fit Sphere

The wavefront aberration analysis and testing accuracy evaluation for the large aberration aspheric system based on the best fit sphere - art. no. 68342V

Testing of Large-Aperture Aspheric Mirrors Using a Single Coated Lens.

Aspheric Test Combining Front and Back Null Compensation for Infinite Optical Path

Mixed compensation for the testing of large convex aspheres

Practical and Accurate Method for Aspheric Misalignment Aberrations Calibration in Non-Null Interferometric Testing

Distance Deviation Sensitivity on Null Test of Convex Hyperboloid Mirrors with Large Relative Aperture

Mapping Error Correction of Large Off-Axis Aspheric Surface in Null Test

Computer-aided alignment in null testing of large aspheric mirrors

Interferometric Cross Test Of A Convex Even Asphere

Corrective machining of monolithic multiple freeform mirrors based on holographic null test

Position Error Correction Of Large-Aperture Aspherical In-Position Measurement

Convex Aspherical Surface Testing Using Catadioptric Partial Compensating System

Interferometric Null Testing and the Model for Separating Adjustment Errors

Practical Retrace Error Correction in Non-Null Aspheric Testing: A Comparison