Self-heating Technique of Metallic Substrate for Reel-to-reel and Double-Sided Deposition of YBa 2 Cu 3 O 7− Δ Films

Fei Zhang,Ruipeng Zhao,Yan Xue,Hui Wang,Yuanying He,Pan Zhang,Bowan Tao,Jie Xiong,Yanrong Li

DOI: https://doi.org/10.1007/s00339-015-9575-4

2016-01-01

Applied Physics A

Abstract:A new, simple, and highly efficient heating technology for metal tape substrates is proposed and applied to reel-to-reel and double-sided film deposition. In this technology, direct electrical current (I DC) is conducted into the metal layer of oxide-buffered metal substrate to induce heat. Different substrate surface temperatures were achieved by varying I DC from 22 to 25 A. At these temperatures, a series of 1-μm-thick and 5-cm-long YBa2Cu3O7−δ (YBCO) films were fabricated on ion-beam-assisted deposition (IBAD) templates through metal organic chemical vapor deposition. X-ray diffraction analysis on the samples revealed that the YBCO film changed its growth mode from mixed a-axis and c-axis to purely c-axis with increasing I DC. The optimal out-of-plane and in-plane texture reached ~1.4° and 3.5°, respectively. A 30-m-long and 500-nm-thick single-sided YBCO-coated conductor was also prepared through reel-to-reel deposition using the proposed heating method. The fabricated conductor presented homogeneous crystallization and texture and exhibited a critical current density at self-field and 77 K (J c 77K, 0T ) of 2.8–3.2 MA/cm2. Moreover, 500-nm-thick YBCO films were fabricated simultaneously on both sides of the double-sided IBAD template. The two sides of films demonstrated uniform texture and J c 77K, 0T of 3.2 MA/cm2. Results demonstrated that the proposed substrate heating technology can be used for reel-to-reel and double-sided deposition of YBCO-coated conductors.