Abstract:The thin film evaporation process through use of thin micro-scale sintered copper mesh screen was proven to be a very effective heat transfer mechanism with high critical heat flux (CHF). This efficient heat transfer mechanism is widely used in designing heat pipe, Capillary Pumped Loops (CPL), and drying process, however, the nucleation process and meniscus dynamics at the liquid-vapor-solid interface are not directly observed and systematically studied. Very. few visual investigation in thin film evaporation has been conducted. In the existing two visual studies, the interface thermal resistance between coating and the heated wall was not seriously considered, and the heat flux was limited below 35 W/cm(2). In this visualization investigation, the nucleation process and meniscus dynamics from initial condition to drying out were observed and well documented. To minimize the interface thermal resistance, the micro scale wicking was sintered to heated wall directly. High quality images were acquired through a well-designed visualization system. The majority of nucleate bubbles, whose diameters are at a magnitude of 10 mu m, were found to form on the top wire surfaces instead of inside the porous media at moderate heat flux. Few large size bubbles were observed to grow inside capillary wicks, however, their presence did not seem to stop the evaporation process as reported before. The menisci receding process was visually captured for the first time. The minimum menisci radius was found to form at the smallest corners and pores. It is also illustrated the thin liquid area increases when the menisci recede and the thin liquid film evaporation is the dominant heat transfer mode at high heat flux. The present work visually confirms the heat transfer regimes of evaporation on micro porous media, which was proposed by Li and Peterson [2], and further improves the understanding to the nucleate boiling and thin liquid film evaporation on the surfaces of micro sintered copper mesh screen.

An Ir Thermal Imaging Method to Investigate Spreading Process of Ethanol Solution Droplets on Carbon Fiber Mats

Photostimulated Spiropyran for Instantaneous Visualization of Thermal Field Distribution and Flow Pattern

Spatiotemporal infrared measurement of interface temperatures during water droplet evaporation on a nonwetting substrate

Study of Infrared Thermal Image in Process of Wet Etching

Thermal infrared mapping of the freezing phase change activity of micro liquid droplet

Simulation investigation of the effect of heating temperature and porosity of porous media on the water evaporation process

Experimental Investigation of Velocity and Temperature Distribution Inside Single Droplet Impingement on a Heated Substrate

Investigating particle phase velocity in a 3D spouted bed by a novel fiber high speed photography method

Water drops on nanofiber-coated substrates: Influence of wall temperature and coating thickness on hydrodynamics and wall heat flux distribution

Study on In-Plane Thermal Conduction of Woven Carbon Fiber Reinforced Polymer by Infrared Thermography

Dynamic Imaging and Analysis of Transient Mass Transfer Process Using Pixelated-Array Masked Phase-Shifting Interferometry

Experimental Investigation on Capillary Force of Composite Wick Structure by IR Thermal Imaging Camera

Experimental Investigation on Wetting Process of Water Droplets on Micro-/Nanoporous Copper Films

In Situ Observation of Thermal Marangoni Convection on the Surface of A Sessile Droplet by Infrared Thermal Imaging

Visualization of temperature distribution and flow behavior in water evaporation using water‐soluble spiropyran

Novel Method to Study the Particle Circulation in a Flat-Bottom Spout-Fluid Bed

The Visualization Of Thin Film Evaporation On Thin Micro Sintered Copper Mesh Screen

Infrared Characterization of Thermal Convection of Liquid-layer in Semiconductor Etching Process

Infrared Thermography Investigation of an Evaporating Water/Oil Meniscus in Confined Geometry.

Thermal Imaging Study of Falling Liquid Films

An image analysis technique for the particle mixing and heat transfer process in a pan coater