Abstract:The gas-solid flow in a three-dimensional slot-rectangular spouted bed is numerically investigated under the parallel framework of the computational fluid dynamics-discrete element method coupling approach. The fluid phase is solved with the k-epsilon turbulence model at the computational grid level, while the solid phase is tracked individually with the discrete element method at the particle scale. Millions of particles are calculated using a total number of 112 CPUs in a cluster. The predicted pressure drop profiles and the minimum spouting velocities of the calculations under different bed heights agree well with the experimental data. The startup procedure and the solid flow pattern are identified. Then, wall effects on the distribution properties of the gas-solid hydrodynamics are explored. Moreover, the interaction between spout and annulus and the effects of the superficial velocity and bed height on the bed hydrodynamics are discussed. The results show that a larger pressure drop appears in the system with a higher bed height. A bubble with its shape influenced by the slot geometry is formed in the startup procedure. Moreover, the bed hydrodynamics show a strong 3-D behavior along the depth direction. Large vertical solid flux mainly concentrates in the central region of the spout. The spout-annulus interface is dramatically influenced by the slot shape and shows different evolutionary tendencies in the different directions, and this influence becomes weaker along the bed height. The larger the superficial velocity is, the higher the bed height and the larger the spouting height appear. Besides, solid flow patterns under different bed heights with the superficial velocity the same ratio to the corresponding minimum spouting velocity show a similar behavior.

Investigating particle phase velocity in a 3D spouted bed by a novel fiber high speed photography method

Particle Velocity Measurements in Transition Section of Turbulent Fluidized Beds Using Optical Fiber Probe and CFD Simulation

Measurement method of particle phase motion parameter based on fiber high speed photography

Developing a High Speed Fiber-optic Endoscopic Technique for Measuring Particle Phase Characteristics in a Spouted Bed

Measurement of Particle Velocity in Spouted Bed Based on the Combination of Fiberscope and High-Speed Photography

Developing a Novel Fibre High Speed Photography Method for Investigating Solid Volume Fraction in a 3D Spouted Bed

Volumetric Three-Component Velocimetry: a New Tool for 3D Flow Measurement

Novel Method to Study the Particle Circulation in a Flat-Bottom Spout-Fluid Bed

Experimental Research on Fluidized Bed Particle Velocity Field Measurement with Image Processing

Observation of 3D Particles Motion Based on High Speed Stereoscopic Image System

New Method for the Investigation of Particle Mixing Dynamic in a Spout-Fluid Bed

Investigating the Particle Dispersion in a Spout-Fluid Bed Using Particle Trajectory

Experimental Investigation on Particle Mixing in Spout-fluid Bed

Numerical Study of Particle Injection into a Gas-Solid Fluidized Bed

On Coherent Structures in Gas–solid Fluidization

Numerical Investigation of the Time-Related Properties of Solid Phase in a 3-D Spout-Fluid Bed

Particle Measurement Sensor for in Situ Determination of Phase Structure of Fluidized Bed

Experimental investigation of particle mixing behavior in a large spout–fluid bed

Three-Dimensional Modeling of Gas–Solid Motion in a Slot-Rectangular Spouted Bed with the Parallel Framework of the Computational Fluid Dynamics–Discrete Element Method Coupling Approach

Experiment on Particle Mixing in Flat-Bottom Spout–fluid Bed

On-line Monitoring of Flow Process in a Spout-Fluid Bed by Combining Electrical Tomography and High-Speed CCD Camera