Abstract:Electrostatic phenomena widely exist in various olefin polymerization fluidized bed reactors, due to the continuous collision and friction of dielectric particles and the low-humidity reaction environment. The measurement of particle charge density is essential for monitoring and controlling the electrostatic level as well as probing the hydrodynamic characteristics in a fluidized bed. In this work, a non-intrusive online measurement system, employing ring-shaped sensing electrodes and a pressure transducer, is designed and implemented on a fluidized bed test rig. A modified model considering the influence of spatial sensitivity of the electrodes is proposed to predict the particle charge density in the fluidized bed, based on the measured induced electrostatic current and pressure drop signals. Experimental results have demonstrated that the induced electrostatic current and pressure drop signals show remarkable similarity, with the two PSDs both mainly distributed within 0.5–5Hz, which indicates close relationship between the two signals. The predicted particle charge density increases with the superficial gas velocity and decreases with the injection content of liquid anti-static agent (LAA), showing the same variation tendencies as that measured through a Faraday cup. When the electrode width is 20mm, the mean absolute relative errors for the direct method, area method and envelope method are 12.7%, 14.7% and 13.5%, respectively, indicating that the direct method is the most reliable signal processing approach proposed in this work.

Particle Measurement Sensor for in Situ Determination of Phase Structure of Fluidized Bed

Particle Velocity Measurements in Transition Section of Turbulent Fluidized Beds Using Optical Fiber Probe and CFD Simulation

Monitoring of Particle Motions in Gas-Solid Fluidized Beds by Electrostatic Sensors

Detection of Particle Mass Flowrate in High-Speed Fluidization Based on Acoustic Emission Technology

Online Measurement of Particle Charge Density in A Gas-Solid Bubbling Fluidized Bed Through Electrostatic and Pressure Sensing

Measurement of circulation time of particles in fluidized bed based on electrostatic induction sensor

Measurement of the Fluidized Velocity in Gas-Solid Fluidized Beds Based on AE Signal Analysis by Wavelet Packet Transform

Determination of Particle Size Distribution by Multi-Scale Analysis of Acoustic Emission Signals in Gas-Solid Fluidized Bed

Measurement of Bed Level in Gas-Solid Fluidized Bed by Ultrasonic Technique

Bubble Characterization in the Gas-Solid Fluidized Bed Using an Intrusive Acoustic Emission Sensor Array

Measurement of Flow Pattern in Fluidized Bed Based on Acoustic Emission and Complexity Analysis

A Comparative Study of Electrostatic Current and Pressure Signals in a MSFC Gas–solid Fluidized Bed

Characterization of Particle Fluidization Pattern in a Gas Solid Fluidized Bed Based on Acoustic Emission (AE) Measurement

Measurement method of particle phase motion parameter based on fiber high speed photography

Investigating particle phase velocity in a 3D spouted bed by a novel fiber high speed photography method

An Integrated Instrumentation System for Velocity, Concentration and Mass Flow Rate Measurement of Solid Particles Based on Electrostatic and Capacitance Sensors.

Measurement of Particle Velocity in Spouted Bed Based on the Combination of Fiberscope and High-Speed Photography

A New Particle Sensor Based on True RMS Value Measurement.

Developing a High Speed Fiber-optic Endoscopic Technique for Measuring Particle Phase Characteristics in a Spouted Bed

Three-dimensional Wireless Measurement of Float–Sink Object Motions in a Gas–Solid Fluidized Bed

Dynamic in situ measurement of axial segregation of E-CAT particles in a bubbling fluidized bed