Abstract:Even though lithium-sulfur batteries have appealing advantages including a high theoretical capacity and energy density, their commercial implementation has been seriously hindered by some notorious reasons, particularly the severe shuttling effect, the insulating nature of sulfur, the large volumetric variation during cycling and the sluggish redox reaction kinetics. To tackle these issues, a biomass (ginkgo-nut) derived N,S-codoped porous carbon (GC) with an interconnected honeycomb-like hierarchical structure is synthesized by a templated carbonization method, followed by hydrothermal growth of transition metal sulfide MS2 (M = Co, Ni) nanocrystals, giving rise to a hybrid 3D electrocatalyst. The unique structure constructed by N,S-codoping can expose more active sites and polar surfaces to physically confine and chemically adsorb polysulfides. Meanwhile, the embedded MS2 polyhedral-like nanoparticles further enhance the interaction with polysulfides and improve conversion and redox kinetics of polysulfides. Remarkably, with 80 wt% sulfur loading (∼2.5 mg cm-2), GC-CoS2 exhibits a reversible capacity of 988.8 mA h g-1 after 500 cycles at 0.1 C and an excellent capacity of 610.3 mA h g-1 after 1000 cycles at 2 C, outperforming bare GC and GC-NiS2. Compared with the electrochemical performances of the representative reported biomass-derived sulfur host for Li-S batteries, evidently, both the discharge capacity and cycling stability of our GC-CoS2 sample are superior. Density functional theory (DFT) calculation results suggest that CoS2 exhibits a higher binding energy towards lithium polysulfides and a lower energy barrier for Li+ diffusion on the surface compared to the NiS2 counterpart, suggesting that CoS2 is a better choice for lithium-sulfur batteries than NiS2. This work provides a new avenue to rationally design a carbonaceous catalyst host for high-performance lithium-sulfur batteries.

Low-Cost Synthetic Honeycomb-like Carbon Derived from Cotton as a Sulfur Host for the Enhanced Electrochemical Performances of Lithium–Sulfur Batteries

Bimetallic Nanoparticles Decorated Porous Carbon As the Host Material to Enhance the Performance of Lithium-Sulfur Batteries

Bio-derived N-doped Porous Carbon As Sulfur Hosts for High Performance Lithium Sulfur Batteries

Facile and Scalable Synthesis of Micro-Mesoporous Carbon/magnesium Oxide/sulfur Composite for Lithium-Sulfur Batteries

Facile Synthesis of Porous Li2S@C Composites As Cathode Materials for Lithium–sulfur Batteries

Makeup cotton derived hierarchically porous carbon fibers for constructing a free-standing carbon/sulfur hybrid cathode

Honeycomb-like Nitrogen and Sulfur Dual-Doped Hierarchical Porous Biomass-Derived Carbon for Lithium-Sulfur Batteries

A wheat flour derived hierarchical porous carbon/graphitic carbon nitride composite for high-performance lithium–sulfur batteries

Hollow C/Co9S8 hybrid polyhedra-modified carbon nanofibers as sulfur hosts for promising Li–S batteries

Naturally derived honeycomb-like N,S-codoped hierarchical porous carbon with MS2 (M = Co, Ni) decoration for high-performance Li-S battery

Flexible and Hierarchically Structured Sulfur Composite Cathode Based on the Carbonized Textile for High-Performance Li-S Batteries

Cellulose Substance Derived Nanofibrous Activated Carbon As a Sulfur Host for Lithium-Sulfur Batteries

A Highly Efficient Sulfur Host Enabled by Nitrogen/Oxygen Dual‐Doped Honeycomb‐Like Carbon for Advanced Lithium–Sulfur Batteries

Li2S@C/CNT Composite Cathode with Botryoidal Conductive Network for Advanced Lithium–sulfur Batteries

A Honeycomb‐Structured CoF2‐Modified Separator Enabling High‐Performance Lithium−Sulfur Batteries

High-content of Sulfur Uniformly Embedded in Mesoporous Carbon: a New Electrodeposition Synthesis and an Outstanding Lithium–sulfur Battery Cathode

Carbon Nanotube-encapsulated Chestnut Inner Shell O,N-doped Graded Porous Carbon as Stable and High-Sulfur Loading Electrode for Lithium-Sulfur Batteries

Biomass-Derived Carbon for High-Performance Lithium-Sulfur Batteries

Enhancing performance of lithium-sulfur batteries through porous carbon network integration in carbonized cotton

Immobilization and Catalytic Conversion of Polysulfide by In-Situ Generated Nickel in Hollow Carbon Fibers for High-Rate Lithium-Sulfur Batteries

High-Entropy Oxide Nanofibers as Catalytic Host Promising High Volumetric Capacity of Sulfur-Based Composites for Lithium–Sulfur Batteries