Abstract:Constructing an interlinked three-dimensional conductive carbon structure as a sulfur host is considered to be an effective strategy for suppressing the capacity decay over long-term cycling and improving the rate performance of lithium-sulfur (Li-S) batteries, because it can not only facilitate rapid electronic and ionic transportation in the cathode, but also be conducive to confine lithium polysulfide (LiPS) dissolution and shuttling. In this report, we designed a novel 3D conductive network structure (CNTs/Co-NC), which is composed of Co-NC (cobalt embedded in an N-doped porous carbon composite) derived from ZIF-67 polyhedra and inserted carbon nanotubes (CNTs), and applied it as a sulfur host for Li-S batteries. The CNT/Co-NC network structure is firstly prepared via the in situ nucleation of small ZIF-67 crystals on the surface of CNTs and eventually grown into CNT/ZIF-67 hybrid materials; after subsequent carbonization and infiltration of sulfur procedures, the S@CNT/Co-NC cathode is obtained. Li-S batteries based on the S@CNT/Co-NC cathode show an improved rate capability of 772.6 mA h g-1 at the 2 C rate, enhanced long cycling stability under a large current density with a low capacity decay rate of ∼0.067% per cycle at the 0.5 C rate after 500 cycles and ∼0.072% per cycle at the 1 C rate after 700 cycles and an excellent coulombic efficiency of about 95% up to 500 cycles at 0.5 C and 91% up to 700 cycles at 1 C. The superior performance of S@CNTs/Co-NC should be ascribed to the rapid charge transfer, excellent electron conductivity, improved adsorption capability for LiPSs and enhanced redox kinetics of this 3D conductive network structure.

Enhancing performance of lithium-sulfur batteries through porous carbon network integration in carbonized cotton

Bimetallic Nanoparticles Decorated Porous Carbon As the Host Material to Enhance the Performance of Lithium-Sulfur Batteries

Bio-derived N-doped Porous Carbon As Sulfur Hosts for High Performance Lithium Sulfur Batteries

Low-Cost Synthetic Honeycomb-like Carbon Derived from Cotton as a Sulfur Host for the Enhanced Electrochemical Performances of Lithium–Sulfur Batteries

Porous Carbon Cloth@CoSe2 As Kinetics‐Enhanced and High‐Loading Integrated Sulfur Host for Lithium–Sulfur Batteries

Built‐in Carbon Nanotube Network Inside a Biomass‐Derived Hierarchically Porous Carbon to Enhance the Performance of the Sulfur Cathode in a Li‐S Battery

Conductive Carbon Network inside a Sulfur-Impregnated Carbon Sponge: A Bioinspired High-Performance Cathode for Li-S Battery

Porous Mo2C nanofibers with high conductivity as an efficient sulfur host for highly-stable lithium-sulfur batteries

One-Step Synthesis of N/S Codoped "Porous Carbon Cloth" as a Sulfur Carrier for Lithium-Sulfur Batteries

Porous Carbon Nanofiber Paper As an Effective Interlayer for High-Performance Lithium-Sulfur Batteries

Porous Carbon Architecture Assembled by Cross-Linked Carbon Leaves with Implanted Atomic Cobalt for High-Performance Li–S Batteries

A novel carbon nanotubes@porous carbon/sulfur composite as efficient electrode material for high-performance lithium-sulfur battery

A 3D Conductive Network of Porous Carbon Nanoparticles Interconnected with Carbon Nanotubes As the Sulfur Host for Long Cycle Life Lithium-Sulfur Batteries.

Optimized Sulfur-Loading in Nitrogen-Doped Porous Carbon for High-Capacity Cathode of Lithium–sulfur Batteries

Green biomass-derived hierarchically porous non-activated carbon from carob waste for high-performance lithium-sulfur batteries

Biomass Waste Inspired Highly Porous Carbon for High Performance Lithium/Sulfur Batteries

Revisit Carbon/Sulfur Composite for Li-S Batteries

Assembling Carbon Pores into Carbon Sheets: Rational Design of Three-Dimensional Carbon Networks for a Lithium Sulfur Battery

Regulating surface condition of cotton-derived carbon towards enhanced lithium ion storage behavior

Carbon: Nanoarchitectured Graphene/CNT@Porous Carbon with Extraordinary Electrical Conductivity and Interconnected Micro/Mesopores for Lithium‐Sulfur Batteries (adv. Funct. Mater. 19/2014)

3D Interconnected Crumpled Porous Carbon Sheets Modified with High-Level Nitrogen Doping for High Performance Lithium Sulfur Batteries