Abstract:Among various energy storage/conversion systems, lithium-sulfur batteries are considered as one of the most promising candidate due to not only very high theoretical energy density of 2600 Wh kg-1 (based on lithium-sulfur redox couple) and wide operating temperature range benefiting from its unique multiple-electron-transfer chemistry, but also abundant reserves and environmental friendliness of sulfur. However, several intrinsic obstacles should be overcome for its applicably extension, including the ultra-low electrical conductivity of sulfur and its lithiated products, huge volumetric changes during charge and discharge, and the shuttling mechanism of soluble intermediate polysulfides. Here, a hierarchical nanostructured carbon/sulfur hybrid in which the porous carbon was in situ integrated into graphene/single-walled carbon nanotube (SWCNT) hybrid matrix with small cyclo-S8 molecule clusters was fabricated as advanced cathode material for lithium-sulfur battery application. The sp2 graphene/SWCNT hybrid interlinked framework was served as robust conductive scaffold with good electrical conductivity and structure stability, while the micro-/mesoporous carbon accommodated sulfur and lithium polysulfides, provided accessibility for liquid electrolyte to active material, and suppress the shuttle behavior due to the spacial confinement. Therefore, such hierarchical all-carbon nanostructure hybridized with small cyclo-S8 molecule clusters obtained an excellent electrochemical performance including an ultrahigh specific capacity of 1121 mAh g-1 at 0.5 C, a favorable high-rate capability of 809 mAh g-1 at 10 C, a very low capacity decay of 0.12 % per cycle, and an impressive cycling stability of 877 mAh g-1 after 150 cycles at 1 C. As sulfur loading increasing from 50 wt % to 77 wt %, high capacities of 970, 914, and 613 mAh g-1 were still available at current densities of 0.5, 1, and 5 C respectively. Based on the total mass of packaged devices, gravimetric energy density of GSH@APC-S//Li cell was expected to be 400 Wh kg-1 at a power density of 10000 W kg-1, matching the level of engine driven systems. Reference: [1] HJ Peng, et al. Adv. Funct. Mater., 2014, DOI: 10.1002/adfm.201303296

Honeycomb-like Nitrogen and Sulfur Dual-Doped Hierarchical Porous Biomass-Derived Carbon for Lithium-Sulfur Batteries

Palladium nanocrystals-imbedded mesoporous hollow carbon spheres with enhanced electrochemical kinetics for high performance lithium sulfur batteries

A Nitrogen/Oxygen Dual-Doped Porous Carbon with High Catalytic Conversion Ability Toward Polysulfides for Advanced Lithium–Sulfur Batteries

Bio-derived N-doped Porous Carbon As Sulfur Hosts for High Performance Lithium Sulfur Batteries

Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High-Energy Lithium Battery

Bimetallic Nanoparticles Decorated Porous Carbon As the Host Material to Enhance the Performance of Lithium-Sulfur Batteries

Sustainable Synthesis of N‐Doped Hollow Porous Carbon Spheres Via a Spray‐Drying Method for Lithium‐Sulfur Storage with Ultralong Cycle Life

Naturally derived honeycomb-like N,S-codoped hierarchical porous carbon with MS2 (M = Co, Ni) decoration for high-performance Li-S battery

Nitrogen/sulfur dual-doped micro-mesoporous hierarchical porous carbon as host for Li-S batteries

Hierarchical Nanostructured Carbon/Sulfur Hybrid Cathode for High-Performance Lithium-Sulfur Battery

Nitrogen–sulfur Dual-Doped Porous Carbon Spheres/sulfur Composites for High-Performance Lithium–sulfur Batteries

3D Hierarchical Mesoporous Carbon with P and N Dual-doped as Electrocatalyst Host for High-performance Li-S Batteries

Boosting the Rate Performance of Li-S Batteries Via Highly Dispersed Cobalt Nanoparticles Embedded into Nitrogen-Doped Hierarchical Porous Carbon

Hierarchical Porous Carbon Materials Derived from Self-Template Bamboo Leaves for Lithium–Sulfur Batteries

A Highly Efficient Sulfur Host Enabled by Nitrogen/Oxygen Dual‐Doped Honeycomb‐Like Carbon for Advanced Lithium–Sulfur Batteries

Facile synthesis of high-content nitrogen-doped hierarchical porous carbon spheres for high-capacity lithium-sulfur batteries

Carbon Foam Fibers with a Concentric Tube‐Core/Three‐Dimensional Nanosheet‐Sheath Structure for High‐Performance Lithium‐Sulfur Batteries

Nanoarchitectured Graphene/CNT@Porous Carbon with Extraordinary Electrical Conductivity and Interconnected Micro/Mesopores for Lithium‐Sulfur Batteries

Promising Au&CNTs@N-Doped Hierarchical Carbon Composite for High-Performance Lithium–Sulfur Batteries

Biomass Derived Nitrogen-Doped Highly Porous Carbon Material with a Hierarchical Porous Structure for High-Performance Lithium/Sulfur Batteries

Superhierarchical Cobalt-Embedded Nitrogen-Doped Porous Carbon Nanosheets As Two-in-One Hosts for High-Performance Lithium-Sulfur Batteries