Abstract:Rectangular explosive charges are usually used in military or civilian explosive transportation and storage. The effects of shape parameters and detonation positions on the peak overpressure and maximum impulse of blasts lack comprehensive investigation, which is significant for the design of blast-resistant structures. In this paper, the side-length ratio of the rectangle, orientation, and detonation position of the charge are chosen as controlling parameters to investigate their influence on blast loads in the scaled distances of the gauges ranging from 0.63 to 10.54 m/kg 1/3 with well validated 3D numerical simulations. The results show that there is a large difference in the near-field spatial distribution of the blast load of the rectangular charge; if the blast load of the rectangular charge is simply evaluated with the spherical charge, the maximum peak overpressure (maximum impulse) will be underestimated by a factor of 7.46 (4.84). This must be taken seriously by blast-resistant structure designers. With the increase in the scaled distance, when the critical scaled distance is greater than 6.32 (7.38) m/kg 1/3 , the influence of the charge shape on the maximum peak overpressure (maximum impulse) of the spatial blast load can be ignored. In general, the impact of detonation of the charge at the end on the maximum peak overpressure is greater compared with central detonation, but for the impact of the maximum impulse, it is necessary to pay attention to the side-length ratio of the rectangular charge and the specific detonation position on the end face. Furthermore, the structural response of steel plates placed at different azimuths under the blast load of a rectangular charge is preliminarily analyzed, and the results show that the deformation and energy of the plates are consistent with the distribution of the blast load. These analysis results provide a reference for the explosion protection design in near-field air explosions.

Structure optimization of linear shaped charge based on different explosives

Research of Loading Effects of Blast in Air

Groove Charge of a Rigid Multi-Point Initiation Explosive Network

Numerical Simulation and Experimental Study of LEFP on Impact Initiation Process of Charge with Shell

Variable Air Blast Fireball of HMX/Al with Tailored Gradient Structures

Orthogonal Optimization Design for Combined MEFP Warhead

The Calculation and Optimal Design on the Lethal Power of a Large-caliber High Explosive Projectile

Research on the crack formation mechanism of shaped charge blasting and the new dual-shaped charge blasting technology

Effect of explosives charges types on the jet characteristics, penetration performance and fragmentation patterns of shaped charges

Effect of material characteristics of explosive on formation of collinear explosively formed projectile from warhead with double layer liners

Effect of microstructure on functional force and air explosion performance of CL-20-based aluminum-containing explosive

Study on the effect of shape parameters and initiation points of rectangular high explosive on the spatial distribution of blast loads

Numerical simulation and optimized design of a launching system with a novel charge structure

The Effect of Explosive Material on the Formation of Explosively Formed Penetrator

Formation of explosively-formed projectile with tail fins using polygonal charges

Experimental Investigation on the Enhancing Effect of Reactive Materials on Explosion Fireballs and Shock Waves of Composite Charges

Experimental research and application of drilling and blasting with directional damage-reduction shaped charge

Forming Control of Rod-Shaped Tantalum-Tungsten Alloy Explosively Formed Projectile

Near-field Blast Loadings from Explosion of Two Typically Shaped Charges

Low speed impact simulation of explosive charge based on three-dimensional numerical manifold method