Abstract:Abstract In order to provide a theoretical basis for studying the shock wave propagation and evolution generated by cylindrical charge of near-field underwater explosion, the characteristics of initial shock waves generated by cylindrical charge are studied. First, a new theoretical model for initial shock waves is proposed by the polar curve method. Based on the theoretical model and the simulated results, the influences of incident angle, length-to-diameter ratio and type of charge on the initial shock waves are analysed. Then the experiments of underwater explosion load tests are carried out to verify the theoretical and simulation results. Finally some instructive conclusions are drawn: i) The two-dimensional theoretical model can calculate the initial underwater shock wave pressure and its direction of cylindrical charge through detonation velocity, detonation pressure, explosive density and incident angle, which is provides a theoretical basic for studying the shock wave propagation and evolution studies. By comparing the theoretical results with the numerical results verified by experiments, the maximum error is not more than 9.93%. ii) Increasing the incident angle α 0 will reduce the initial shock wave pressure of cylindrical charge and make its direction deflect towards the material interface. When the incident angle α 0 is in the range of 0 - 10°, increasing the incident angle makes the initial shock wave pressure decrease rapidly as a power function. With the increasing of the incident angle, the attenuation rate of the initial shock wave firstly decreases and then increases when the incident angle α 0 is in the range of 10 - 72°. This phenomenon explains the reason that the axial and radial initial shock wave pressures are much higher than those in other directions after the central initiation of cylindrical charge. iii) According to the geometric relationship, the length-to-diameter ratio of the charge will limit the range of the incident angle. The length-to-diameter ratio will affect the initial shock wave pressure at the same initiation time. The pressure decreases with the increase of the length-to-diameter ratio when the initial shock wave is formed on the cylindrical surface of the charge.

Near-field Blast Loadings from Explosion of Two Typically Shaped Charges

Study on the characteristics of blast loads due to two simultaneous detonated charges in real air

Probability Distribution and Determination of Blast Loading During Structural Blast Resistant Study

Research of Loading Effects of Blast in Air

Study on the effect of shape parameters and initiation points of rectangular high explosive on the spatial distribution of blast loads

Numerical Simulation of Internal Gaseous Explosion Loading in Large-Scale Cylindrical Tanks with Fixed Roof

Experimental and numerical study on external explosions of cylindrical versus spherical charges at tunnel entrance

Numerical Simulation of the Blast Wave of a Multilayer Composite Charge

Study on the characteristics of initial shock waves generated by cylindrical charge for underwater explosion

Influence of Explosive Shape on the Response of Steel Plates under Blast Loading

Finite Element Simulation of Medium-Range Blast Loading Using LS-DYNA

Blast wave characteristics of multi-layer composite charge: Theoretical analysis, numerical simulation, and experimental validation

Explosion wave and explosion fracture characteristics of cylindrical charges

Numerical Simulation of Blast Loadings on A Thick-Walled Cylindrical Vessel

Double blast loadings of clamped square steel plates

Underwater Explosion of Slender Explosives: Directional Effects of Shock Waves and Structure Responses

Numerical Simulation on Dynamic Response of the Cylindrical Explosion Containment Vessel with an Elliptical Cover

Characterization of Underwater Explosive Loads of Blasting and Shaped Charges

Investigation on Damage Mechanism of RC Column under Close-in Explosion

Numerical Simulation on Flow-Structure Interaction Loaded by a Blast Wave from a Central Charge

Seismic wavefield model excited by a finite long cylindrical charge