Abstract:We present investigations into a narrow-linewidth, quasi-continuous-wave pulsed all-solid-state amplified spontaneous emission (ASE) source by use of a novel multiple-pass zigzag slab amplifier. The SE fluorescence emitted from a Nd:YAG slab active medium acts as the seed and is amplified back and forth 8 times through the same slab. Thanks to the angular multiplexing nature of the zigzag slab, high-intensity 1064-nm ASE output can be produced without unwanted self-lasing in this configuration. Experimentally, the output energy, optical conversion efficiency, pulse dynamics, spectral property, and beam quality of the ASE source are studied when the Nd:YAG slab end-pumped by two high-brightness laser diode arrays. The maximum single pulse energy of 347 mJ is generated with an optical efficiency of ~5.9% and a beam quality of 3.5/17 in the thickness/width direction of the slab. As expected, smooth pulses without relaxing spikes and continuous spectra are achieved. Moreover, the spectral width of the ASE source narrows versus the pump energy, getting a 3-dB linewidth of as narrow as 20 pm (i.e. 5.3 GHz). Via the sum frequency generation, high-intensity, smooth-pulse, and narrow-linewidth ASE sources are preferred for solving the major problem of saturation of the mesospheric sodium atoms and can create a much brighter sodium guide star to meet the needs of adaptive imaging applications in astronomy.

High-Power Thulium-Doped All-Fibre Amplified Spontaneous Emission Sources

High-power single-stage thulium-doped superfluorescent fiber source

High-power all-fiber superfluorescent source with fused angle-polished side-pumping configuration.

933 W Yb-doped Fiber ASE Amplifier with 504 Nm Bandwidth

2 $μ$m Watt-level Fiber Amplifiers, Lasers, and ASE Sources Pumped by Broadband ASE Pumps

13.9-Mj All Fiber Wide Band Ytterbium-Doped Fiber Amplifier

High-power and high-brightness Er:Yb codoped fiber MOPA operating at 1535 nm

Widely-tunable All-Fiber Tm Doped MOPA with >1 Kw of Output Power

All-fiber High Energy and Peak Power Broadband Yb-doped Fiber Amplifier

252 W core-pumped single-frequency all-fiber amplifier at 1064 nm

Tapered active fiber simultaneously enabled 141 W high average and 1.3 MW high peak power via all-fiber and polarization-maintained picosecond amplifier

219.6 W large-mode-area Er:Yb codoped fiber amplifier operating at 1600 nm pumped by 1018 nm fiber lasers

Low repetition rate broadband high energy and peak power nanosecond pulsed Yb-doped fiber amplifier

High-power nanosecond pulse amplified spontaneous emission source at 3.1 μm based on C 2 H 2 -filled nested hollow core anti-resonant fiber

Hundreds of picosecond pulses amplifier based on Yb-doped tapered fiber for the generation of 100 W average output power

Narrow-linewidth, quasi-continuous-wave ASE source based on a multiple-pass Nd:YAG zigzag slab amplifier configuration

Kilowatt-level Yb-Raman fiber amplifier with narrow-linewidth and near-diffraction-limited beam quality

Kilowatt-level ytterbium-Raman fiber amplifier with a narrow-linewidth and near-diffraction-limited beam quality

All-fiber 30-μm core diameter Yb-doped pulse-pumped amplifier cascade generating 10 nm-bandwidth 545 kW peak power pulses

High-Powered Millijoule Pulse Energy Tm3+-Doped Fiber Amplifier at 2.05 Mu M

227-W output all-fiberized Tm-doped fiber laser at 1908 nm