Abstract:In this work, the hydrogen desorption properties of the novel Mg-Al-H hydrogen storage composites prepared by ball-milling the as-received magnesium hydride (MgH2) and the as-prepared aluminum hydride (AlH3) with different molar ratios (1:1, 1:0.5, and 1:0.25) are investigated systematically. Nonisothermal desorption measurements show that more than 7.51 wt % of hydrogen is released from the Mg-Al-H composites when they are heated from room temperature to 500 degrees C. Thermal analysis by differential scanning calorimeter (DSC) and hydrogen desorption spectrum by mass spectrometer (MS-H-2) are used synchronously to study the desorption process of the Mg-Al-H. The onset hydrogen desorption temperature of MgH2 in the MgH2 + AlH3 composite is dramatically reduced from 320 degrees C for the pure MgH2 to below 252 degrees C. The DSC/MS-H-2 and the X-ray diffraction (XRD) analyses show that the desorption of MgH2 in the Mg-Al-H composite is composed of two steps with the reaction between MgH2 and Al forming Mg17Al12 as the first step and the self-decomposition of the residual MgH2 as the second step. Isothermal desorptions show that the desorption kinetics of the MgH2 in the Mg-Al-H composite is significantly improved. The apparent activation energy for the desorption of MgH2 in the MgH2 + 0.25AlH(3) is reduced to 144.6 kJ/mol, which contributes to the improvement in the desorption kinetics of MgH2. The Johnson-Mehl-Avrami (JMA) kinetic studies indicate that the desorption kinetic model of MgH2 in the Mg-Al-H composite is different from the pure MgH2. Concerning the reversibility, under the conditions of 300 degrees C and 5 MPa H-2, MgH2 in the Mg-Al-H composite is almost fully recovered after absorption for 5 h while it is partially recovered for the pure MgH2. Among the samples studied, the MgH2 + 0.25AlH(3) composite exhibits the highest reversible hydrogen storage capacity of 6.10 wt % (H/M).

The Thermal-Stability of Amorphous Hydride Mg50ni50h54 and Mg30ni70h45

Hydrogen absorption and its influence on the thermal stability of Zr 65Al 10Ni 10Cu 15 amorphous alloy

Effect of interlayer and deposition temperature on the hydrogen storage properties of amorphous Mg-based thin films

Investigation on the Stability of the Hydrides of Ml1-xCaxNi5 Intermetallic Compounds

Investigation on the stability of the hydrides of Ml(1-x)Ca(x)Ni(5) intermetallic compounds

Experimental and numerical study of temperature evolution and hydrogen desorption process on an amorphous alloy Mg50Ni50

Study on the Dehydrogenation Properties and Reversibility of Mg(Bh4)(2)-Alh3 Composite under Moderate Conditions

Microstructures And Hydrogen Desorption Properties Of The Mgh2-Alh3 Composite With Nbf5 Addition

Hydrogen desorption properties of the MgH2-AlH3 composites

Achieving Fast Hydrogenation by Hydrogen-Induced Phase Separation in Mg-based Amorphous Alloys

Microstructures and hydrogen storage characteristics of nanocrystal/amorphous Mg17Al12 alloy prepared by ball-milling

High entropy alloys containing immiscible Mg and refractory elements: Synthesis, structure, and hydrogen storage properties

Study on Microstructure and Hydrogen Storage Properties of Mg80Ni16−xAlxY4 (x = 2, 4, 8) Alloys

Improved Hydrogen Storage Properties of MgH2 by Ball Milling with AlH3: Preparations, De/rehydriding Properties, and Reaction Mechanisms

Amorphization and Electrochemical Hydrogen Storage Properties of Mechanically Alloyed Mg–Ni

DFT investigations of doping effects on the structural stability, thermal diffusion, and absorption/desorption kinetics in cubic, hexagonal, and monoclinic Mg 2 NiH x hydrides

Microstructures and Hydrogen Storage Properties of Ti10V83-xFe6ZrMnx Alloys

In-situ X-ray diffraction analysis of hydrogen-induced LaMg12 phase decomposition

Thermodynamic Destabilization Of Magnesium Hydride Using Mg-Based Solid Solution Alloys

Influence of element substitution on structural stability and hydrogen storage performance: A theoretical and experimental study on TiCr2-xMnx alloy

Hydriding and Dehydriding Kinetics of Nanocrystalline and Amorphous Mg20ni10-Xmx (m=cu, Mn; X=0-4) Alloys Prepared by Melt Spinning