Abstract:In this work, the hydrogen desorption properties of the novel Mg-Al-H hydrogen storage composites prepared by ball-milling the as-received magnesium hydride (MgH2) and the as-prepared aluminum hydride (AlH3) with different molar ratios (1:1, 1:0.5, and 1:0.25) are investigated systematically. Nonisothermal desorption measurements show that more than 7.51 wt % of hydrogen is released from the Mg-Al-H composites when they are heated from room temperature to 500 degrees C. Thermal analysis by differential scanning calorimeter (DSC) and hydrogen desorption spectrum by mass spectrometer (MS-H-2) are used synchronously to study the desorption process of the Mg-Al-H. The onset hydrogen desorption temperature of MgH2 in the MgH2 + AlH3 composite is dramatically reduced from 320 degrees C for the pure MgH2 to below 252 degrees C. The DSC/MS-H-2 and the X-ray diffraction (XRD) analyses show that the desorption of MgH2 in the Mg-Al-H composite is composed of two steps with the reaction between MgH2 and Al forming Mg17Al12 as the first step and the self-decomposition of the residual MgH2 as the second step. Isothermal desorptions show that the desorption kinetics of the MgH2 in the Mg-Al-H composite is significantly improved. The apparent activation energy for the desorption of MgH2 in the MgH2 + 0.25AlH(3) is reduced to 144.6 kJ/mol, which contributes to the improvement in the desorption kinetics of MgH2. The Johnson-Mehl-Avrami (JMA) kinetic studies indicate that the desorption kinetic model of MgH2 in the Mg-Al-H composite is different from the pure MgH2. Concerning the reversibility, under the conditions of 300 degrees C and 5 MPa H-2, MgH2 in the Mg-Al-H composite is almost fully recovered after absorption for 5 h while it is partially recovered for the pure MgH2. Among the samples studied, the MgH2 + 0.25AlH(3) composite exhibits the highest reversible hydrogen storage capacity of 6.10 wt % (H/M).

High entropy alloys containing immiscible Mg and refractory elements: Synthesis, structure, and hydrogen storage properties

Mechanical Synthesis and Hydrogen Storage Characterization of MgVCr and MgVTiCrFe High‐Entropy Alloy

Hydrogen Storage Properties of Mg+10% TiFe_(1-x)Cr_x(x=0,0.3) Multi-Phase Alloys

The Hydriding and Dehydriding Properties of Some Multicomponent Rare-Earth Magnesium Alloys

Improving the hydrogen cycling properties by Mg addition in Ti-V-Zr-Nb refractory high entropy alloy

Hydrogen desorption properties of the MgH2-AlH3 composites

Microstructure and Hydrogen Storage Characteristics of Nanocrystalline Mg+xwt% LaMg2Ni (x=0–30) Composites

Hydrogen Storage Properties of Mg-doped Ti 1.2 Fe Alloys Synthesized by Mechanical Alloying

Promoting Catalysis in Magnesium Hydride for Solid-State Hydrogen Storage Through Manipulating the Elements of High Entropy Oxides

Combinations of V2C and Ti3C2 MXenes for Boosting the Hydrogen Storage Performances of MgH2

Study on Microstructure and Hydrogen Storage Properties of Mg80Ni16−xAlxY4 (x = 2, 4, 8) Alloys

Compositional effects on the hydrogen storage properties in a series of refractory high entropy alloys

Hydrogen storage properties of Mg0.10Ti0.30V0.25Zr0.10Nb0.25 lightweight high entropy alloy: A theoretical study

Achieving Fast Hydrogenation by Hydrogen-Induced Phase Separation in Mg-based Amorphous Alloys

Superior hydrogen storage in high entropy alloys

Influence of element substitution on structural stability and hydrogen storage performance: A theoretical and experimental study on TiCr2-xMnx alloy

Synthesis and Hydrogen Sorption Characteristics of Mechanically Alloyed Mg(NixMn1-x)2 Intermetallics

Crucial role of Mg on phase transformation and stability of Sm–Mg–Ni-based AB2 type hydrogen storage alloy

Tunable Hydrogen Storage in Magnesium - Transition Metal Compounds

Ternary Mg-Nb-H polyhydrides under high pressure

Exploring the Hydrogen Sorption Capabilities of a Novel Ti-V-Mn-Zr-Nb High-Entropy Alloy