Abstract:High-entropy alloys (HEAs) are garnering widespread interest due to their exceptional hydrogen storage capabilities at ambient temperatures. Herein, a series of HEAs composed of V-Ti-Cr-Mn-Fe with varying Ti/Cr ratios has been synthesized via arc melting to serve as carrier materials for room-temperature hydrogen storage. Thanks to the composition of a large amount of body centered cubic (BCC) phase V32TixCr58-xMn5Fe5 exhibits excellent hydrogen storage performance, and the hydrogen absorption capacity of these HEAs escalates while the desorption capacity initially rises followed by a decline with an increase in the Ti/Cr ratio. Notably, the HEA with a Ti/Cr ratio of 1.0, namely V32Ti29Cr29Mn5Fe5, demonstrates exceptional performance by absorbing 3.55 wt% H2 within 60 min and rapidly releasing 2.16 wt% H2 within 5 min at 303 K. Further enhancement is achieved with the strategic doping of Ce in the V32Ti29Cr29Mn5Fe5, which leads to the removal of the Ti-rich phase and the incorporation of CeO2, significantly improves the activation performance, allowing the Ce-doped HEA to reach saturation in the 3rd hydrogen absorption cycle. Consequently, the hydrogen ab-/desorption capacities at ambient temperature are further augmented to 3.73 wt% and 2.26 wt%, respectively, and the enthalpies of hydrogen ab-/desorption are significantly reduced to -25.0 and 23.4 kJ/mol H2, marking a new benchmark for V-based HEAs. Dramatically, DFT calculations suggestes that the incorporation of Ce diminishes the structure energy of BCC phase structure for V32Ti29Cr29Mn5Fe4Ce1 as well as elongates the average distance of M-H from 1.955 & Aring; to 1.969 & Aring;, which corroborate the experimental results, offering profound insights into the underlying mechanisms of hydrogen storage within BCC-phase HEAs at ambient temperature.

Mechanical Synthesis and Hydrogen Storage Characterization of MgVCr and MgVTiCrFe High‐Entropy Alloy

Development of Ti–Zr–Mn–Cr-(V–Fe) Based Alloys for Hydrogen Feeding System in Hydrogen Metallurgy Application

Binding Energy Crossover Mechanism Enables Low-Temperature Hydrogen Storage Performance of Dual-Phase TiZrCrMnNi(VFe) High-Entropy Alloy

Evolution of the Phase and Hydrogen Storage Properties of New-Type VTiCrFeMn High-Entropy Alloy Prepared via Mechanical Alloying

Hydrogen storage in TiVCr(Fe,Co)(Zr,Ta) multi-phase high-entropy alloys

High entropy alloys containing immiscible Mg and refractory elements: Synthesis, structure, and hydrogen storage properties

Hydrogen Storage Properties and Crystal Structure of Ti-Cr Based Alloys

Hydrogen Storage Properties of Mg+10% TiFe_(1-x)Cr_x(x=0,0.3) Multi-Phase Alloys

The Design of Mg–Ti–V–Nb–Cr Lightweight High Entropy Alloys for Hydrogen Storage

The Effect of Cr Content on the Structural and Hydrogen Storage Characteristics of Ti10V80−xFe6Zr4Crx (x = 0–14) Alloys

Experimental and theoretical insights into vanadium-based alloys for room temperature hydrogen storage on the example of Ti16Cr22Zr5V55-Fe2Mn (x=0–3) alloys

Study on microstructure and the hydrogen storage behavior of a TiVZrNbFe high-entropy alloy

Hydrogen storage properties of V+TiFe0.85Mn0.15 multi-phase alloys

Exploring the Hydrogen Sorption Capabilities of a Novel Ti-V-Mn-Zr-Nb High-Entropy Alloy

Microstructures and Hydrogen Storage Properties of Ti10V83-xFe6ZrMnx Alloys

Hydrogen Storage Properties of a New Ti-V-Cr-Zr-Nb High Entropy Alloy

Ti/Cr Regulated and Strategic Ce Doped V-Ti-Cr-Mn-Fe High-Entropy Alloys with Extraordinary Reversible Hydrogen Storage Properties at Ambient Temperature

Design and mechanosynthesis of Low-Weight High-Entropy Alloys with hydrogen storage potential properties

Hydrogen Storage Properties of Ti-Cr-Mn-M (M=V, Fe, Ni, Cu) Alloys

Hydrogen storage properties in rapidly solidified TiZrVCrNi high‐entropy alloys

Superior cycle life of TiZrFeMnCrV high entropy alloy for hydrogen storage